Scholars Central

Conference abstractPublished 6 Oct 2014

Change of the physical properties of colored high density polyethethylene by effect of environment

Authors: K E Shady, F M Tera

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

This study deals with the environment and different liquid environments effect on bath the color fastness and the mechanical properties - expressed as tensile strength and elongation - of colored high density polyethylene polymer in net form, used for warning and as an indicator for the undo ground pipes passage. It was found that withering affects the tensile strength and the elongation considerably, while change on temperature of the surroundings was of less effect. Also, environment liquids caused a small loss in tensile strength of about (6%) while the samples in extended percent or about (22%) was observed. Both parameters were showed an appreciable change at damped soiling mud. The light fastness of the examined polymer samples were greatly affected by weathering conditions, while the other factors did not affect the light fastness considerably.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalJournal of Material Sciences & Engineering
  • SubjectEngineering
  • SubjectMaterials Science
  • BylineArticles whose byline prints “K E Shady”
  • BylineArticles whose byline prints “F M Tera”