Scholars Central

Conference abstractPublished 27 Sep 2017

H-LCBF - Harvesting of Chlorella sp. with low-cost bio-flocculant: An approach for clean environment with bioprocess engineering

Authors: Richa Kothari, Arya Pandey, Paul N Black

Babasaheb Bhimrao Ambedkar University, India University of Nebraska-Lincoln, USA

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Harvesting of Chlorella sp. with low-cost bio-flocculant: An approach for clean environment with bioprocess engineering (H-LCBF): In order to use microalgae as a feedstock for biofuels and other bioproducts, optimal conditions must be established for harvesting following growth. Prior to downstream bio-processing including cell disruption, oil extraction and trans-esterification for biodiesel production, the microalga must be harvested, dewatered and dried. The common harvesting methods include chemical flocculation, centrifugation, and pressurized filtration. The application of chemical flocculants is problematic with the algal cell surfaces requiring long incubation times following cell growth that result in increased costs. Various process parameters i.e. pH, temperature, contact time, flocculent dose, mixing rate, ionic strength, and settling time etc. are act an influencing ones during biomass harvesting. To overcome these barriers, the development of a bio-flocculant and its engineering chemistry (zeta (Ã?¶) potential) for harvesting algae was the key objective in this experimental study. Egg-shell materials were developed as an effective bio-flocculant for harvesting different Chlorella sp. Various concentrations of this material (0-100 mg/L) along with differences in contact times (0-50 minutes) were employed to analyze harvesting efficiency. It was found that maximal harvesting (95.6%) was achieved with 100 mg/L of the egg-shell bio-flocculant. Using 100 mg egg-shell bio-flocculant/L, Ã?¶ potential analyses were completed to further understand the chemistry leading to maximized harvesting efficiency over a range of pH (2, 4, 8, and 10). These studied defined the influence of pH and in particular demonstrated that maximal harvesting efficiency (99%) was accomplished at a pH of 4. Collectively, these studies found key relationships between the Ã?¶ potential and pH that positively impact harvesting efficiency as the first step in bio-processing, which is seen as a boon for a sustainable biofuel economy.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalJournal of Bioengineering & Biomedical Science
  • SubjectBiochemistry & Biotechnology
  • BylineArticles whose byline prints “Richa Kothari”
  • BylineArticles whose byline prints “Arya Pandey”
  • BylineArticles whose byline prints “Paul N Black”