Conference abstractPublished 16 Nov 2017
Precipitation behavior of AlN and its influence on the microstructure and mechanical performance of a hot rolled C-Mn steel
University of London, UK
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
The influence of Al content level on the lower-yield strength and impact behavior in plain carbon steel under hot rolling conditions has been examined. A ferrite/pearlite microstructure was obtained with ~10% volume fraction pearlite. Although increasing Al from 0.02% to 0.16% did not significantly affect the strength, a considerable improvement in impact behavior occurred, the impact transition temperature (ITT) decreasing by 40o C. This was mainly attributed to the removal of N from solution although there was some benefit from refinement of the grain boundary carbides and refinement of the grain size by the precipitation of AlN. Yield strength was not affected because the reduction in strength from N removal by the Al was counter-balanced by the solid solution hardening from the high Al content. The next stage in this hot rolling programme will be to see whether similar improvements can be found when Nb is added as a microalloying addition.
Subjects
EngineeringAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Steel Structures & Construction
- SubjectEngineering
- BylineArticles whose byline prints “Abdullah Qaban”
- BylineArticles whose byline prints “Barrie Mintz”
- BylineArticles whose byline prints “Sumsun Naher”
