Article · 19 Feb 2026
Conference abstractPublished 17 Jul 2017
Behavior of elastic modulus of nano filled epoxy resin under dynamic mechanical and nano hardness analysis
Indian Institute of Technology-BHU, India
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
A carbon nano material such as multi-walled carbon nanotubes (MWCNTs) and graphene nano platelets (GnPs) has attracted considerable interest over recent years due to its intrinsic mechanical, thermal and electrical properties. Incorporation of small quantity of nano fillers into polymer can create novel nano composites with improved structural and functional properties. The properties of polymers, as reflected by their response to externally applied stresses, are dependent on both time and temperature. The dynamic mechanical analysis (DMA) of polymer-based MWCNT/epoxy resin and GnP/epoxy resin nano composites provides important insight into the intimate conformation of the polymer chains in the sample, as well as the interactions of these chains with MWCNT and GnP components in the composite system. Therefore, dynamic mechanical and nano hardness measurements of MWCNT/epoxy resin and GnP/epoxy resin nano composite were used to evaluate the effect of temperature on dynamic elastic modulus. These provide direct information on various other characteristic structural parameters, such as dynamic viscoelastic behavior, glass transition temperature (Tg), storage and loss moduli, and tan Ã?´. The results of these measurements for all samples were compared, and allowed the evaluation of the effect of a magnetic field on the MWCNT/epoxy resin and GnP/epoxy resin nano composites. It can be seen that the storage modulus decreased with the increase of temperature, whereas loss modulus increased with increase of temperature. At low temperatures, all the samples show a very high value of the storage elastic modulus, followed by gradual drops due to second order transactions between 40oC to 110oC. The principal drop, due to the glass transaction, is evident for all samples in the range 130oC to 140oC. But, tanÃ?´ curves show a peak value 150oC to 160oC of temperature range indication glass transaction temperature. This indicates that the addition of nano filler improves the elastic properties of the epoxy system at elevated temperatures in the rubbery region. The loss modulus indicates that the energy has been converted into heat and can thus be used as a measurement of viscous component or unrecoverable oscillation energy dissipated per cycle. It may be further concluded that the nano hardness increases with increase of elastic modulus, as shown in figure.
Subjects
EngineeringMaterials ScienceAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
More from this journal
The newest in Journal of Material Sciences & Engineering.
Perspective · 29 Dec 2025
Nanostructured Thin Films: Advancing Next-Generation Electronics
Brief report · 29 Dec 2025
Microstructural Defects: Impact on Material Properties and Performance
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Material Sciences & Engineering
- SubjectEngineering
- SubjectMaterials Science
- BylineArticles whose byline prints “Vijay K Srivastava”
