Scholars Central

Conference abstractPublished 13 Jul 2017

Hot corrosion of plasma sprayed and laser sealed coatings of yttria partially stabilized zirconia thermal barrier coatings with molten eutectic vanadate-sulfate salt

Authors: Ali Mezher Resen, Mohammed Jasim Kadhim, Sami Aboalnoon Ajeel

University of Technology, Iraq

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Yttria partially stabilized zirconia thermal barrier coatings are frequently promising ceramic coatings used in many hot sections of turbine engines and isolation unit of fuel in oil refineries. Many surface sealing treatments have been employed to improve service lifetimes of these coatings by improving chemical and thermo-mechanical resistance. This work aimed to study the effect of hot corrosion molten salt of eutectic V2O5 + 45 wt% Na2SO4 on the performance of as-sprayed and as-sealed zirconia 8 wt% yttria coatings. Hot corrosion was done by exposing the samples to an isothermal air furnace testing at 900Ã?°C for different exposure times of 1, 40, and 80 hours. Upper surface plan views of the coatings were examined using scanning electron microscopy to observe the morphological and microstructural changes. Element analysis and phases identification of the corrosion products were determined using energy dispersive spectroscopy (EDS), electron probe microanalysis (EPMA) and X-ray diffraction (XRD). The results indicate the higher resistance of as-sealed coatings compared with as-sprayed coatings to the hot corrosion. Degradation due to the presence of eutectic harsh salt attack was occurred by destabilization of yttria from the zirconia yttria coatings. This will lead to disrupt transformation from metastable tetragonal phase (t') to monoclinic phase (m). The formation of m phase having lower yttria content is taken place due to the formation of YVO4 by leaching process. This introduces additional stresses which may lead to final degradation of coatings. The low leaching rate of yttria for the sealed coatings is related to the absence of pockets of open porosity eliminated after laser sealing of porous plasma sprayed coating.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

More from this journal

The newest in Journal of Material Sciences & Engineering.

All its articles

Conferences in this field

Upcoming conferences in this field.

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalJournal of Material Sciences & Engineering
  • SubjectEngineering
  • SubjectMaterials Science
  • BylineArticles whose byline prints “Ali Mezher Resen”
  • BylineArticles whose byline prints “Mohammed Jasim Kadhim”
  • BylineArticles whose byline prints “Sami Aboalnoon Ajeel”