Scholars Central

Conference abstractPublished 26 Jun 2017

Critical role of in-situ formed wide-graphene nanoribbons (Wide-GNRs) on the mechanical and thermal shock behaviors of spark plasma sintered titanium carbide composites

Authors: Sribalaji M, Biswajyoti Mukherjee, Srinivasa Rao Bakshi, Anup Kumar Keshri

Indian Institute of Technology, Patna, India Indian Institute of Technology, Madras, India

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Carbon nanotubes/CNTs (2 wt.%) reinforced titanium carbide (TiC) ultra high temperature ceramic with 3.5 wt.% of tungsten carbide (WC) as sintering aid was fabricated using spark plasma sintering (SPS) technique at 1600Ã?°C and 50 MPa pressure. In-situ formation of wide graphene nanoribbons (wide-GNR) was observed after sintering. High resolution transmission electron microscopy (HR-TEM) and Raman spectroscopy techniques confirmed the presence of in-situ formed wide-GNRs. Mechanical properties of TiC, TiC-WC and TiC-WC-CNT sintered pellets were evaluated using an instrumented microindenter at a load of 49 N. No significant change was observed in the hardness of TiC after the reinforcement of WC and CNT. However, the reinforcement of CNT and in-situ formation of GNR in TiC-WC-CNT pellet has showed a drastic improvement of ~126% and ~ 98% when compared to TiC and TiC-WC sintered pellets respectively. This significant enhancement in the fracture toughness of TiC-WC-CNT pellet can be attributed to the novel toughening mechanisms like GNR pull out, GNR grain wrapping, GNR crack bridging, crack bifurcation, CNT pull out and CNT grain gluing. Further, the thermal shock behaviour of TiC, TiC-WC and TiC-WC-CNT sintered pellets was determined at 1700Ã?°C using conventional water quenching test. The results from the thermal shock analysis showed that TiC-WCCNT pellet has higher resistance to thermal shocks compared to other TiC composites. The microstructural investigations after thermal shock test indicate that higher thermal resistance is strongly dependent on the reduced formation of oxide phases.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

More from this journal

The newest in Journal of Material Sciences & Engineering.

All its articles

Conferences in this field

Upcoming conferences in this field.

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalJournal of Material Sciences & Engineering
  • SubjectEngineering
  • SubjectMaterials Science
  • BylineArticles whose byline prints “Sribalaji M”
  • BylineArticles whose byline prints “Biswajyoti Mukherjee”
  • BylineArticles whose byline prints “Srinivasa Rao Bakshi”
  • BylineArticles whose byline prints “Anup Kumar Keshri”