Article · 19 Feb 2026
Conference abstractPublished 12 Jun 2017
Preparation of hydroxyapatite from industrial waste phosphogypsum by hydrothermal method, its application in waste treatment
University Hassan II of Casablanca, Morocco Technical University of Berlin, Germany
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Phosphogypsum (PG) is an industrial waste derived from the production of phosphoric acid where the phosphate ore is dissolved in sulfuric acid. About 5 tons of phosphogypsum are produced for every ton of P2O5 manufactured. Worldwide PG production is huge, and it is estimated that 200,000 tons are produced annually in phosphoric acid plants. In fact, 85% of the worldwide production remains at present stored into piles near the factory that occupy considerable land resources, or completely discharged into water, which lead to serious contamination. In consequence, valorizing and minimizing the negative effects of this hazardous waste increasingly grab the attention of researchers all around the world. In the present work, the conversion of an industrial sub-product phosphogypsum (PG) into hydroxyapatite (H-Ap) was investigated. Hydrothermal synthesis was applied by reacting PG with a salt at different times, temperatures, while adjusting pH using sodium hydroxide solution NaOH (1 M). The obtained H-Ap exhibited a hexagonal structure, a high purity and nanorod- like shaped of 44 nmx12 nm. The prepared nano-hydroxyapatite was characterized by X-ray diffraction (XRD), Fourier transformed-infrared spectroscopy (FT-IR), transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The findings showed that PG recycling could be accomplished using an easy synthesis route with relatively cheap reactants in order to produce nano-crystalline H-Ap. The elaborated hydroxyapatite powder was used as en effective adsorbent of organic dyes/heavy metals from wastewater.
Subjects
EngineeringMaterials ScienceAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
More from this journal
The newest in Journal of Material Sciences & Engineering.
Perspective · 29 Dec 2025
Nanostructured Thin Films: Advancing Next-Generation Electronics
Brief report · 29 Dec 2025
Microstructural Defects: Impact on Material Properties and Performance
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Material Sciences & Engineering
- SubjectEngineering
- SubjectMaterials Science
- BylineArticles whose byline prints “Hiba Bensalah”
- BylineArticles whose byline prints “Maged F Bekheet”
- BylineArticles whose byline prints “Saad Alami Younssi”
- BylineArticles whose byline prints “Mohamed Ouammou”
- BylineArticles whose byline prints “Aleksander Gurlo”
