Article · 18 Jun 2026
Conference abstract
Porous Titanium Implants Fabricated by Powder Metallurgy Technique (Biomechanical and Histological Evaluation)
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Background: It may be an important prospective clinical use for the manufacturing of porous implants for clinical situations, such as cases of limited available bone height, poor bone quality. The small segment of porous implant allowed an effective osseointegration, due to increased contact area provided by its surface configuration. Objective: Fabrication of porous titanium implants by powder technology, as well as the observation of removal torque values of porous titanium implants compared to smooth titanium implants, and to investigate the biocompatibility of these porous implants. Material and methods: Twenty four porous titanium implants (3.2 mm in diameter and 8 mm in length) were manufactured by powder technology using commercially pure titanium powder of â?¤75um particles size, with polyvinyl alcohol powder of 212- 300 um particle size, as a space holder, by volume ratio (70:30)% respectively. The mixed powder was compacted using punch and die set-specially designed for this studyâ??under 20 bar then sintering at 900Ë?C by the use of argon gas. Twenty four smooth titanium implants were prepared of (3.2 mm in diameter and 8mm in length) by lathing of commercially pure titanium rod as a control group. The implants were examined by X-ray diffraction (XRD) and also the microstructure was investigated by scanning electron microscope (SEM), as well as estimation of porosity percentage. For each tibia of the 24 white New Zealand rabbits, one implant of each type (one porous in right, and the smooth in left tibia), through surgical procedure was carried under serial condition with antibiotic cover. Mechanical test was performed to evaluate the bone-implant interface, after (2 and 6 weeks) healing periods. The implants were divided as: 40 implants in 20 rabbits (divided into 20 porous and 20 smooth implants) were used for the measurement of torque removal amount required to remove implants from bone. The remaining 4 animals received 8 implants, these four porous and four smooth implants were divided to two groups. 2 rabbits were selected for each histological examination period (2, 6) weeks. Result: Porous implants were obtained successfully by powder technology with 52% porosity and pore size 210±17 um. The porous implant showed significantly higher removal torque values when compared to smooth implants, at two different intervals of examination (2,6 weeks), this proved to be statistically highly significant. Also, a highly significant difference was noticed for the means of the torque removal values in the same group at different implantation period. In addition, histological analysis confirmed new bone formation in contact with implant, as well as improvement of bone in response to porous titanium implants compared to those produced by smooth implants, with no evidence of clinical or histological features of inflammatory reaction with both. Conclusion: Powder technology seemed to be particularly advantageous in fabrication of porous titanium implant with interconnected porous structure with pore size (210±17 um) and 52% porosity. Porous implant shows a biocompatibility and increasing bone ingrowth compared to the smooth type represented by higher removal torque values and supported by histological analysis for both healing periods (2, 6) weeks.
Keywords
Subjects
Dentistry & Oral HealthAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
More from this journal
The newest in Oral Health and Dental Management.
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalOral Health and Dental Management
- SubjectDentistry & Oral Health
- BylineArticles whose byline prints “Widad A H Alnakkash”
- BylineArticles whose byline prints “Duha Hussain Mohammed”
