Scholars Central

Conference abstractPublished 12 Sep 2016

Microstructure and mechanical properties of a low C medium Mn heavy plate steel

Authors: Lin-Xiu Du, Hong-Yan Wu, Jun Hu, Xiu-Hua Gao

Northeastern University, China

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Advanced heavy steel plates with combination of high strength and superior low-temperature toughness are preferred as constructural materials for ship hull, bridges, buildings, pressure vessels, and offshore structures. The medium Mn steels containing 5-8 wt.% Mn are thought to have great potential. The microstructure and mechanical properties of a 0.07C-5.5 wt.% Mn steel subjected to quenching and intercritically tempering was studied. The slab of 230 mm thickness was hot rolled to 50 mm plate with the start rolling and finish rolling temperature of 1050Ã?°C and 930Ã?°C, respectively. The plate was directly water quenched to a temperature between Ms and Mf of 380Ã?°C, and then cooled slowly to room temperature in a delayed cooling pit. The quenched plate was tempered at 630Ã?°C for 80 min and 650Ã?°C for 40 min respectively. The microstructure of quenched steel consisted of martensite and retained austenite. The yield strength, tensile strength, and elongation was 805 MPa, 1114 MPa, and 16.7%, respectively. The impact energy at 20Ã?°C and -20Ã?°C was 207J and 150J. The reverse transformed austenite formed during intercritically tempering. The yield strength and tensile strength of 650Ã?°C tempered speciemens were decreased to 650 MPa and 829 MPa. The elongation was increased to 26.2%. The impact energy at 20Ã?°C and -20Ã?°C was 223 J and 157 J. When the tempering temperature was 630Ã?°C, the yield strength, tensile strength, and elongation was 648 MPa, 824 MPa, and 24.6%, respectively. The impact energy at 20Ã?°C and -20Ã?°C was greatly enhanced to 239 J and 207 J. The change of mechanical properties was attributed to the volume fraction and stability of austenite.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

More from this journal

The newest in Journal of Material Sciences & Engineering.

All its articles

Conferences in this field

Upcoming conferences in this field.

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalJournal of Material Sciences & Engineering
  • SubjectEngineering
  • SubjectMaterials Science
  • BylineArticles whose byline prints “Lin-Xiu Du”
  • BylineArticles whose byline prints “Hong-Yan Wu”
  • BylineArticles whose byline prints “Jun Hu”
  • BylineArticles whose byline prints “Xiu-Hua Gao”