Scholars Central

Conference abstractPublished 22 Aug 2016

On the effect of autofrettage on compressive behavior of fiber metal composite cylinder

Authors: Sumana B G, Vidyasagar H N, M Krishna

Government Engineering College, Hassan, India University Visvesvaraya College of Engineering, India R V College of Engineering, India

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Modern industries use fiber reinforced composite cylinders and tubes to store and transport fluids due to their noncorrosive nature and high specific strength. But, they are hygroscopic resulting in dimensional change when exposed to certain chemicals and gases. In this regard, alternate technologies such as hybrid composite cylinders, fiber reinforced metallic cylinders, autofrettaged metallic cylinders, etc. have been reported. But only few or none were based on the investigation of compressive strength of autofrettaged fiber reinforced metallic laminate (FML) cylinders. The objective of the work was investigating the effect of autofrettage on compression behavior of FML cylinders. The FML composites cylinders were fabricated by pultrusion process. Epoxy reinforced glass fiber polymer wound on aluminum metallic liner of 3 mm wall thickness at fiber orientation of 0Ã?°/90Ã?° and fiber reinforced polymer (FRP) thickness of 1 mm and 2 mm, were subjected to different levels (percentage) of autofrettage. Autofrettage was induced using a hydraulic pump test rig that could apply internal pressure up to a maximum of 200 MPa. FML cylinders and autofrettaged FML cylinders were subjected to radial compression in a computerized universal testing machine of maximum capacity 600 KN. The compressive strength and aspect ratio of all the cylinders were investigated. Experimental results show that autofrettaged FML cylinders increase compressive strength, with better energy absorption capacities than FML cylinders. Also, increasing the percentage of autofrettage enhances the compressive strength of the composite cylinder along with reduced deformation. From the investigation, it can be concluded that the compressive strength increase with increase in percentage of autofrettage and thickness of FRP.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

More from this journal

The newest in Journal of Material Sciences & Engineering.

All its articles

Conferences in this field

Upcoming conferences in this field.

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalJournal of Material Sciences & Engineering
  • SubjectEngineering
  • SubjectMaterials Science
  • BylineArticles whose byline prints “Sumana B G”
  • BylineArticles whose byline prints “Vidyasagar H N”
  • BylineArticles whose byline prints “M Krishna”