Article · 19 Feb 2026
Conference abstractPublished 25 Jul 2016
Preparation of MgAl2O4 nanopowders via hydrolysis of double magnesium-aluminum isopropoxide
G G Devyatykh Institute of Chemistry of High-Purity Substances RAS, Russia N I Lobachevsky State University of Nizhny Novgorod, Russia
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Magnesium aluminate spinel ceramics is promising optical material for industrial and military applications due to its high hardness, melting point, thermal conductivity and high optical transmission in the ultraviolet, visible, and infrared spectral ranges. The properties of such ceramics are significantly determined by the characteristics of the starting powder: its stoichiometry, morphology and crystallite size. This work is devoted to the development of MgAl2O4 nanopowders fabrication technique via alkoxotechnology using double magnesium aluminum isopropoxide (MgAl2(OPri)8) as the precursor. MgAl2(OPri)8 was synthesized by interaction of activated magnesium-aluminum alloy with isopropyl alcohol. Since the precursor is a volatile compound, vacuum distillation method was successfully used for its purification and the possibility of high pure powders synthesis from starting technical pure grade materials were demonstrated. According to ICP-AES analysis the main impurities in synthesized MgAl2(OPri)8 are Si (9 ppm), Fe (0.39 ppm), Na (0.35 ppm), Zn (0.36 ppm). The content of the rest elements is below the detection limit. The hydrolysis of MgAl2(OPri)8 was performed by azeotropic mixture isopropyl alcohol âÂ?Â? water (ratio 88:12 vol. %) with equimolar ratio 1:8. Magnesium aluminate spinel powders were obtained by calcining the hydrolysis products at 900Ã?°C. The powder particles are spherical with the average size of 30-50 nm and aggregated into soft agglomerates up to 50 Ã?¼m in size. The resulting powders were used to sinter MgAl2O4 ceramic by hot pressing at a temperature of 1600Ã?°C and pressure of 50 MPa in graphite dies. Optical transmission of obtained transparent samples is more than 80%.
Subjects
EngineeringMaterials ScienceAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
More from this journal
The newest in Journal of Material Sciences & Engineering.
Perspective · 29 Dec 2025
Nanostructured Thin Films: Advancing Next-Generation Electronics
Brief report · 29 Dec 2025
Microstructural Defects: Impact on Material Properties and Performance
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Material Sciences & Engineering
- SubjectEngineering
- SubjectMaterials Science
- BylineArticles whose byline prints “Anastasia V Novikova”
- BylineArticles whose byline prints “Stanislav S Balabanov”
- BylineArticles whose byline prints “Alexander V Belyaev”
- BylineArticles whose byline prints “Evgeny M Gavrishchuk”
- BylineArticles whose byline prints “Victor V Drobotenko”
- BylineArticles whose byline prints “Dmitry A Permin”
