Scholars Central

Conference abstractPublished 13 Jun 2016

Deformation response of solid solution strengthened alloy 617 with non uniform grain boundary carbide distribution

Authors: Hamouda Ghonem, Daniel Spader

University of Rhode Island, USA

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Microstructural changes in grain boundary carbide precipitates have been correlated with stress during creep of solid solution strengthened by nickel based superalloy, alloy 617, at 950Ã?°C. The observed redistribution of carbides and carbide migration is explained in terms of dissolution of carbides under compressive stress and coarsening along boundaries subjected to tensile stress. The role of carbide, size, volume fraction and distribution on the deformation response has been examined on 3 microstructure variants of alloy 617 subjected to low cycle fatigue testing under strain controlled loading conditions at 760Ã?°C. The 3 microstructures are (1) as-rolled microstructure with uniform distribution of discrete carbide precipitates along all grain boundaries in addition to the presence of carbides in the matrix, (2) solution treated microstructure (1200Ã?°C for 2 hours and water quenched) with no carbides in the matrix or along grain boundaries, and (3) solution treated microstructure (1200Ã?°C for 2 hours and water quenched) subjected to creep testing at 950Ã?°C. This sequence results in redistribution of carbides, localized along boundaries perpendicular to creep load direction which are subjected to tensile stresses. Hysteresis loops associated with complex low cycle fatigue testing were used to determine the isotropic hardening, in terms of yield strength and cyclic hardening/softening, as well as, the kinematic hardening (long- and short-range) as a function of grain boundary carbide size and volume fraction. Results of this analysis are incorporated in a non-linear kinematic, internal state variable model to simulate the cyclic stress-strain response of alloy 617 as a function of the microstructure state with respect to the carbide distribution.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

More from this journal

The newest in Journal of Material Sciences & Engineering.

All its articles

Conferences in this field

Upcoming conferences in this field.

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalJournal of Material Sciences & Engineering
  • SubjectEngineering
  • SubjectMaterials Science
  • BylineArticles whose byline prints “Hamouda Ghonem”
  • BylineArticles whose byline prints “Daniel Spader”