Article · 19 Feb 2026
Conference abstractPublished 19 Aug 2019
Impact of grain size on failure of AZ31 magnesium alloy
Deakin University, Australia La Trobe University, Australia
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Magnesium alloys has attracted attention of automotive industries as a substitution to aluminium and steel sheet components due to its higher specific strength and specific bending stiffness. Grain refinement has shown promise to simultaneously enhance ductility and strength in magnesium alloys. Previous studies had mostly focused on strengthening mechanisms and processes in the initial stages of deformation, whereas the impact of grain size later during deformation has been largely ignored. In the present study, several techniques including optical microscopy, electron backscattered diffraction, energy dispersive X-ray spectroscopy, micro X-ray computed tomography and tensile testing equipped with GOM-ARAMIS system were employed to evaluate hot rolled AZ31 with six different grain sizes in terms of ductility and its relationship to failure behavior. Materials with similar basal texture and second-phase particles and average grain sizes 3, 7, 12, 22, 30 and 60 μm were examined. The improvement of failure strain with grain refinement is associated with altering void formation and reduction of twinning activity. Penny-shaped voids in the coarse-grained (60 μm) material change to mostly fine roundshaped ones in the fine-grained (3 μm) material. Rate of void nucleation shows insignificant change while rate of void growth markedly reduces with grain refinement. Reduction of twinning activity would decrease probability of damage developing at twin boundaries and increased grain boundary density would make hurdle to void growth.
Subjects
EngineeringMaterials ScienceAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
More from this journal
The newest in Journal of Material Sciences & Engineering.
Perspective · 29 Dec 2025
Nanostructured Thin Films: Advancing Next-Generation Electronics
Brief report · 29 Dec 2025
Microstructural Defects: Impact on Material Properties and Performance
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Material Sciences & Engineering
- SubjectEngineering
- SubjectMaterials Science
- BylineArticles whose byline prints “Seyed Hadi Mohamadi Azghandi”
- BylineArticles whose byline prints “Matthias Weiss”
- BylineArticles whose byline prints “Benedicta D Arhatari”
- BylineArticles whose byline prints “Matthew R Barnett”
