Scholars Central

Conference abstractPublished 20 May 2019

Quasi in situ XPS characterization applied to PEALD selective deposition of TiO2 the IMPACT 300mm project and platform: Merging academic research and industrial applications in microelectronic

Authors: Bernard Pelissier

CNRS, LTM, MINATEC Campus, France

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Selective deposition (ASD for Area Selective Deposition) processes are currently a very active topic of study in the microelectronicâ??s field. Indeed, this type of growth (bottom-up approach) allows to avoid problems of overlays or CDâ??s variability and mostly to lower costs compared to the classic top-down approaches requiring very complex developments when the dimensions are reduced: multipatterning, or Extreme UV. In this context a selective deposition process of TiO2 on TiN versus Si has been developed at lab [1]. This type of ASD deposition is based on alternating cycles of PEALD (Plasma Ehanced Atomic Layer Deposition) and phases of surface etching / passivation. In this scheme, these phases of passivation can avoid growth on intended areas for a certain number of cycles ALD. In order to understand and control the key steps in these processes during these successive deposit / engraving / passivation cycles, in-situ or quasi in-situ metrologies are valuable tools. They become mandatory when addressing surfaces presenting strong reactivity to air, as in this case here (TiN and Si). This concept of quasi in-situ analysis with mobile vacuum carrier [2] is one of the key facet of the IMPACT project and characterization platform, which has already been validated for many applications (various growth studies, reactive layers in plasma etching, surface functionalization,..) [3, 6]. Thus, after a synthetic description of the platformâ??s concept and setup the presentation will highlight this specific application for process development of PEALD selective deposition of TiO2 on TiN versus Si. In particular, the study will describe mechanisms involved for these selective growth cycles, and this at the level of the atomic layer, detailing each cycle from the first layers deposited. Recent Publications 1. Selective deposition of Ta2O5 by adding plasma etching super-cycles in PEALD steps Vallat, R. Gassilloud, & al. , J. Vac. Sci. technol. A 35 (2017) 01B104 2. XPS analysis with an ultra clean vacuum substrate carrier for Oxydation and AMC preventionB.Pelissier, H.Kambara, & al. , Microelectronic Engineering 85 (2008) 151-155 3. Impact of Oxidation on Ge2Sb2Te5 and GeTe Phase-Change Properties E.Gourvest, B.Pelissier, & al. , Journal of The Electrochemical Society, 159 (4) H373-H377 (2012) 4. Control of C content in amorphous GeTe films deposited by PE-MOCVD for PCRAM applications M.Aoukar, P.Szkutnik, & al. , Journal of Physics D: Applied Physics, 48 (26), (2015) 5. Dry efficient cleaning of PMMA residues from graphene with highdensity H2 and H2-N2 plasmas G.Cunges, D.Ferrah, & al. , Journal of Applied Physics 118, 123302 (2015) 6. Wet and Siconi® cleaning sequences for SiGe p-type metal oxide semiconductor channels P.E. Raynal, V. Loup & al. , Microelectronic Engineering, 187-188, (2018), p84-89

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

More from this journal

The newest in Journal of Material Sciences & Engineering.

All its articles

Conferences in this field

Upcoming conferences in this field.

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalJournal of Material Sciences & Engineering
  • SubjectEngineering
  • SubjectMaterials Science
  • BylineArticles whose byline prints “Bernard Pelissier”