Article · 19 Feb 2026
Conference abstractPublished 8 Apr 2019
Chemisorbed CO2 on the surface of Co-SnO2 characterization and room temperature gas sensor
Nanyang TechnologicalUniversity, Singapore University of Konya NecmettinErbakan, Turkey Beni- Suef University, Egypt National Research Instituteof Astronomy and Geophysics,Egypt
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Pure and Cobalt-doped Tin oxide (SnO2 and SnO2:Co) thin films of varying thickness were successfully fabricated by the sol-gel spin coating technique. The samples were characterized by X-ray diffraction (XRD) and scanning electron microscope (SEM). The effect of a number of layers on the structural and optical properties of SnO2 and SnO2: Co films were studied. The crystallite size of the pure SnO2 films increased from 7.7 to 31.1nm by increasing the number of layers from 12 to 24. The crystallinity of the film enhanced with increasing the annealing temperature from 400oC to 500oC. However, it reduced by incorporating Co atoms. The transmittance and the optical band gap of the SnO2 film decreased by increasing the number of layers or after Co doping. The 8% Co-doped film shows relatively higher sensitivity for CO2 gas at room temperature (RT) compared to un-doped SnO2 film of increase of respect to CO2 concentration is 0.116/sccm for Co-doped SnO2. In this study, the carbon dioxide gas acted as an oxidizing agent that caused the increase in the electrical resistance of the sensor signified by the increase in voltage reading. Carbon dioxide sensing mechanism involves its disintegration into CO- and O- .These species are adsorbed on the surface of the thin film. The negative charge trapped in these oxygen species caused an upward band bending on the SnO2 nanomaterial thus increasing its resistance compared to the flat band situation before CO2 gas exposure. The response and recovery times increased as the CO2 concentration increased. The obtained results possibility of controlling the filmâ??s physical properties for sensing and optoelectronic applications.
Subjects
EngineeringMaterials ScienceAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
More from this journal
The newest in Journal of Material Sciences & Engineering.
Perspective · 29 Dec 2025
Nanostructured Thin Films: Advancing Next-Generation Electronics
Brief report · 29 Dec 2025
Microstructural Defects: Impact on Material Properties and Performance
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Material Sciences & Engineering
- SubjectEngineering
- SubjectMaterials Science
- BylineArticles whose byline prints “Mohamed A Basyooni”
- BylineArticles whose byline prints “Mohamed Shaban”
- BylineArticles whose byline prints “Gamal F Attia”
