Scholars Central

Conference abstractPublished 25 Mar 2019

3D printing in proton radiotherapy - individualized, patient-specific compensators for shallow situated tumours treatment

Authors: A Wochnik, T Kajdrowicz, R Kopec, D Krzempek, K Krzempek, B Michalec, G Mierzwinska, J Swakon, P Olko

Institute of Nuclear Physics - Polish Academy of Sciences, Poland

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

In modern proton therapy facilities with pencil scanning beam technology the lowest energy of proton beam ranges typically between 60 and 70 MeV, which corresponds to the range of about 3.0-4.1 cm in water. The irradiation of superficial lesions requires application of pre-absorber to deliver more shallow spots. Typically, in such cases a range shifter (RS) is used, in form of the 4 cm thick PMMA plate, attached to the nozzle at a certain distance from the patient body. The air gap enhances beam scattering, affecting the increase of spot size and worsening the beam conformity. To prevent these effects application of printed, individualized proton compensators was proposed. Compensator, attached directly at the patient mask without any air gap between pre-absorber and patientâ??s body allows preventing unwanted beam broadening. The possibility of designing the shape of the compensator individually for each patient allows it to be adapted to the shape, size and position of the tumor. Comparative studies for the use of both types of pre-absorbers - RS and compensator - have been implemented with the printed test cube. Water equivalent thickness, spot sizes and penumbras were investigated. It has been demonstrated that the use of individualized proton compensators allows obtaining better dose distribution in the patient's body because of better beam conformity, also reducing the spot sizes. The procedure of production of such a compensator was developed. Compensator was designed in the TPS and then printed using fused fiber filament (FFF) technology with polylactide (PLA) material.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

More from this journal

The newest in Journal of Material Sciences & Engineering.

All its articles

Conferences in this field

Upcoming conferences in this field.

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalJournal of Material Sciences & Engineering
  • SubjectEngineering
  • SubjectMaterials Science
  • BylineArticles whose byline prints “A Wochnik”
  • BylineArticles whose byline prints “T Kajdrowicz”
  • BylineArticles whose byline prints “R Kopec”
  • BylineArticles whose byline prints “D Krzempek”
  • BylineArticles whose byline prints “K Krzempek”
  • BylineArticles whose byline prints “B Michalec”
  • BylineArticles whose byline prints “G Mierzwinska”
  • BylineArticles whose byline prints “J Swakon”