Scholars Central

Conference abstractPublished 28 May 2018

Polymer nanocomposite luminescent films for solar energy harvesting made by concurrent multibeam multi-target pulsed

Authors: Abdalla Darwish, Aziz Muhammad, Kevin Thompson, Sergey Sarkisov, Endo Tamio, Paolo Mele

Dillard University, USA SSS Optical Technologies, USA Sagamihara Surface Treatment Laboratory, Japan Shibaura Institute of Technology, Japan

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

There are increasing public and private pressures for the adoption of solar power technologies. Because of their adaptability and attractive appearance, there is a burgeoning interest in luminescent solar concentrator (LSC) devices for use in buildings. LSCs are large polymer/glass plates filled/coated with luminescent materials that absorb the sunlight and re-emit it at a longer wavelength. The plate acting as an optical waveguide redirects the re emitted radiation energy to small edge attached photovoltaic (PV) cells to generate electricity. Wide use of LSCs has been hindered by the lack of suitable luminescent coatings. The authors report on the polymer nanocomposite films doped with the nanoparticles of rare earth (RE) doped fluoride phosphor NaYF4:Yb3+, Er3+ (molar proportion: a=3% of Yb3+, b=1 to 5% of Er3+ and [100%-(a+b)] of Y3+) for efficient luminescent solar concentrators (LSCs). The films are deposited using the concurrent multi-beam multi-target pulsed laser deposition of the inorganic target material and matrix assisted pulsed laser evaporation of the polymer (MBMT-PLD/ MAPLE). The advantage is a broad absorption spectrum covering a significant portion of the solar radiation spectrum, high spectral conversion efficiency and low reabsorption due to minimal overlap between the absorption and emission spectra (large stokes shift). The preliminary results show that the polymer PMMA matrix preserves its chemical integrity, structure and uniformity after MAPLE and the luminescent phosphor nanoadditive NaYF4: Yb3+, Er3+ preserves its chemical integrity and crystalline structure as well down conversion optical properties.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

More from this journal

The newest in Journal of Material Sciences & Engineering.

All its articles

Conferences in this field

Upcoming conferences in this field.

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalJournal of Material Sciences & Engineering
  • SubjectEngineering
  • SubjectMaterials Science
  • BylineArticles whose byline prints “Abdalla Darwish”
  • BylineArticles whose byline prints “Aziz Muhammad”
  • BylineArticles whose byline prints “Kevin Thompson”
  • BylineArticles whose byline prints “Sergey Sarkisov”
  • BylineArticles whose byline prints “Endo Tamio”
  • BylineArticles whose byline prints “Paolo Mele”