Conference abstractPublished 4 Jun 2018
Reinforcing effect of poly-furfuryl alcohol on freeze-dried micro-fibrillated cellulose foams
University of Natural Resources and Life Sciences, Austria Wood K-Plus, Austria
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Lightweight foams are of general interest in a diversity of applications because of their low density and high specific surface area. Since there is a special interest to replace fossil-based polymers with polymers from renewable and biodegradable resources, cellulose nanofibrils and lignocellulosic nanofibrils were used to prepare bio-based foams, which could be used for insulating materials. For the preparation of the porous materials, lignin-free bleached wood pulp, termed MFC and microfibrillated cellulose with 17% lignin content (MFLC) were used in aqueous suspensions. Furfuryl alcohol and maleic anhydride were added to the slurry, resulting in ratios of fibrils to furfuryl alcohol of 0.00, 0.03, 0.06, 0.11, 0.20, 0.33 and 0.50. After mixing with a high-shear blender, the mixtures were placed in an oven at 80 Ã?°C for 24 hours in order to polymerize the furfuryl alcohol. Thereafter, foams were prepared by freeze-drying. Characterization of the foams was performed by Scanning Electron Microscopy (SEM), ATR-Fourier Transform Infrared Spectroscopy (FTIR), Thermo-Gravimetric Analysis (TGA) and as well as mechanical testing (e.g. compression tests). Furfuryl alcohol content was found to significantly affect the foam density. Furthermore, mechanical properties were significantly higher for MFLC-based foams.
Subjects
EngineeringMaterials ScienceAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Material Sciences & Engineering
- SubjectEngineering
- SubjectMaterials Science
- BylineArticles whose byline prints “Eva-Marieke Lems”
- BylineArticles whose byline prints “Stefan Winklehner”
- BylineArticles whose byline prints “Wolfgang Gindl-Altmutter”
- BylineArticles whose byline prints “Christian Hansmann”
