Scholars Central

Conference abstractPublished 17 May 2018

Separation of by-product gases in steel industry for carbon resources utilization by semi-alicyclic polyimide membranes

Authors: Jeong Hoon Kim

KRICT - Carbon Resources Institute, South Korea

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Huge amount of by-product gas mixtures (H2, CH4, CO, CO2, N2, etc.) has been produced from steel industry in Korea and worldwide. Among the by-product gases, CH4 and H2 are included in coke oven gas (COG). CO2 and CO is included in blast furnace gas (BFG) and Linz Donawitz gas (LDG) in steel industry. If they can be efficiently separated at high purity and recovery, they can be used valuably for carbon capture and utilization (CCU) producing chemical products such as methanol, ethanol, ethylene, acetic acid, etc. and therefore, contributing to reduction of global warming. There are typical separation technologies: cryogenic, adsorption, absorption and membrane. Membrane technology can be a promising new separation technology owing to cheap plant construction, easy operation, environmental friendliness etc. The economy and energy efficiency of membrane process depends mainly upon gas selectivity and gas permeability of membrane materials. This study shows the preliminary result for the gas separation properties of soluble polyimides as membrane materials - CO2/N2 (or CO2/CO) and H2/CH4 (or CO2/CH4) selectivities and CO2 and H2 permeabilities. We have developed an alicyclic dianhydride -5-(2,5-dioxotetrahydrofuryl)-3-methyl-3-cyclohexene-1,2-dicarboxylic anhydride (DOCDA) based homo- and co-polyimides with various dianhydrides and diamines using m-cresol as a solvent, respectively. Thin dense membranes were prepared from the copolyimides to check their gas permeation properties with a time-lag apparatus. All homo- and copolyimides showed good solubility for organic solvents and excellent thermal stability. The synthesized polyimides showed excellent CO2/N2 (or CO2/CO) and H2/CH4 (or CO2/CH4) selectivities, and high CO2 and H2 permeabilities. These results confirmed these polyimides could be used as membrane materials for the separation of CO2, CH4, H2 and from by-product gases in steel industry. Recent Publications 1. L Zhai et al. (2012) Preparation and characterization of highly transparent and colorless semi-aromatic polyimide films derived from alicyclic dianhydride and aromatic diamines. Polymer 53:3529-3539. 2. S Xia et al. (2013) Synthesis of soluble polyimide derived from novel naphthalene diamines for liquid crystal alignment layers and a preliminary study on the mechanism of imidization, RSC Adv. 3:14661-14670. 3. T Yusuke et al. (2014) Surface wettability controllable polyimides bearing long-chain alkyl groups via phenyl ester linkages by ultraviolet light irradiation. High Performance Polymers 27:46-58. 4. A F Ismail et al. (2015) Gas separation membranes: Polymeric and inorganic. Springer, ISBN 978-3-319-01095-3. 5. D GuzmÃ?¡n Lucero et al. (2015) Gas permeation properties of soluble aromatic polyimides based on 4-fluoro-4,4'-diaminotriphenylmethane. Materials 8:1951.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

More from this journal

The newest in Journal of Material Sciences & Engineering.

All its articles

Conferences in this field

Upcoming conferences in this field.

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalJournal of Material Sciences & Engineering
  • SubjectEngineering
  • SubjectMaterials Science
  • BylineArticles whose byline prints “Jeong Hoon Kim”