Conference abstract
The features of modeling of the nanofluid flows
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Nanofluid is two-phase systems consisting of a base fluid and nanoparticles. The study of the physics and transport properties of nanofluids has started relatively recently. It has been motivated by various applications of nanofluids in many different areas. Therefore, modeling the nanofluid flows is the fashion direction in fluid mechanics. However, the standard approaches are not applicable here. This is due to the fact that the nanofluids have no standard properties. In this paper, the features of the nanofluid flows modeling are analyzed and the thermophysical properties of nanofluids are discussed in detail. It was shown that viscosity and thermal conductivity of nanofluids as a rule did not describe by the classical theories. The transport coefficients of nanofluids depend not only on the volume concentration of the particles but also on their size and material. The viscosity increases with decreasing the particle size while the thermal conductivity increases with increasing the particle size, the reasons of such behavior is explained. Last part of the paper deals with the modeling of two important flows, the heat transfer of nanofluid in cylindrical channel and laminar turbulent transition in Poiseulle and tube flows are considered. It was shown that the heat transfer coefficient is determined by the flow mode (laminar or turbulent) of the nanofluid. The use of the nanofluids as a coolant significantly affect the magnitude of the heat transfer coefficient. The laminar-turbulent transition begins in all cases earlier (at smaller Reynolds numbers) than carrier fluid. In conclusion, the possibility of the use of traditional similarity criteria are discussed. It is shown that the variation in the Prandtl number during modeling does not allow obtaining adequate information about the flow under study, since each point of the obtained dependences corresponds to different nanofluids simply.
Subjects
EngineeringAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Applied Mechanical Engineering
- SubjectEngineering
- BylineArticles whose byline prints “Valery Ya Rudyak”
