Conference abstractPublished 22 Mar 2018
Fabrication of high thermal conductive diamond/copper composites and their joining with substrates
National Tsing Hua University, Taiwan
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Diamond/Cu composites for the use of heat spreader were fabricated via pressureless liquid phase sintering process. Minoraddition of Zr was added into the matrix to improve the wettability between diamonds and Cu matrix. A high thermal conductivity of 716 W/mâÂ?Â?K was obtained for the 50 vol% diamond/Cu composite. Composites fabricated by Cu/Zr flake method can reduce the surface roughness from 35 Ã?¼m to 1.6 Ã?¼m, which is suitable for joining with commercial substrates. AlN, Si, and Al2O3 substrates were joined with composites by commercial lead-free solder paste and liquid metal. Liquid metal joined packages had great performance opposite to the solder pasted ones with the highest thermal conductivity of 342 W/ mâÂ?Â?K in the couple of the Si substrate. For AlN, Si and Al2O3 substrate joined packages, average thermal conductivity were 299, 322 and 148 W/mâÂ?Â?K, respectively. On the reliability of thermal cycle tests for joining packages, the lower thermal cycle (25-85 Ã?°C) was to simulate the operating environment and the higher thermal cycle (25-200Ã?°C) for fabricating environment. It showed great reliability with above 78% residue thermal conductivity after lower temperature 1000 thermal cycles and 79% after higher temperature 5 thermal cycles.
Subjects
EngineeringMaterials ScienceAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Material Sciences & Engineering
- SubjectEngineering
- SubjectMaterials Science
- BylineArticles whose byline prints “Cheng-Ying Lee”
- BylineArticles whose byline prints “Yu-Siang Jhong”
- BylineArticles whose byline prints “Yi-An Lai”
- BylineArticles whose byline prints “Su-Jien Lin”
