Scholars Central

Research articlePublished 2019

Damage Characterization Using Thermography of Composite Plates Subjected to Low Velocity Impact Loads

Authors: Khaled S Al-Athel, Ahmed S Alomari, Abul Fazal M Arif, Faleh A AlSulaiman, Muhammad Haris Malik

Journal of Material Sciences & Engineering

Volume 8 · Issue 4 · Pages 1–16

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Composites are prone to delamination damage when impacted by low velocity projectiles because of the poor through-thickness strength. So, some of the problems with composites are their poor impact damage resistance, low post-impact mechanical properties and the difficulties to inspect the impacted area using nondestructive means. Damage characterization of composite materials requires a logical scientific methodology and a wide knowledge of polymeric materials and additionally a direct field experience. Effort is being taken to locate the most solid Non- Destructive Testing “NDT” strategy for characterization of damage in composite materials. In this work, impact response of composite laminates was experimentally studied with drop-tower to determine the energy absorption. Three types of composites were used: carbon fiber, glass fiber and mixed fiber composite laminates. In addition, these composites were characterized visually and using thermography to quantify their post impact damage. It was found with the 3D temperature distribution that there is a strong correlation between the measured temperatures at the impact region with the quantification of the damage using thermal imaging with advanced mid-wave camera.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

More from this journal

The newest in Journal of Material Sciences & Engineering.

All its articles

Conferences in this field

Upcoming conferences in this field.

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalJournal of Material Sciences & Engineering
  • SubjectEngineering
  • SubjectMaterials Science
  • BylineArticles whose byline prints “Khaled S Al-Athel”
  • BylineArticles whose byline prints “Ahmed S Alomari”
  • BylineArticles whose byline prints “Abul Fazal M Arif”
  • BylineArticles whose byline prints “Faleh A AlSulaiman”
  • BylineArticles whose byline prints “Muhammad Haris Malik”