Scholars Central

Research articlePublished 2018

Effect of Experimental Condition on Properties of Zinc Oxide Films Prepared by Sol-Gel Deposition with Ammonium Hydroxide as an Additive

Authors: Wannes BH, Zaghouania BR, Dimassia W

Journal of Textile Science & Engineering

Volume 8 · Issue 1 · Pages 1–6

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

In this work, we report on the study of undoped zinc oxide (ZnO) thin films prepared by sol-gel spin coating technique using the ammonium hydroxide as an additive. The effect of the precursor concentration and the annealing temperature on the optical and structural properties of the produced films is analyzed; we changed the precursor concentration and the annealing temperature from 0.1 M to 0.2 M and 400°C to 500°C with steps of 0.1M and 100°C, respectively. X-ray diffraction (XRD) results show that ZnO thin films are polycrystalline with a hexagonal structure and preferred growth orientations along the a-axis (100) and c-axis (002) from the substrate surface. The elaborated films have shown a high transparency (more than 75%) in the spectral range from 400 nm to 2000 nm. The optical band gap energy values of the ZnO thin films elaborated are located around 3.22 eV. Room temperature photoluminescence is dominated by a strong luminescence peak around 378 nm and a low-intensity peak around 477 nm.

Subjects

Engineering

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalJournal of Textile Science & Engineering
  • SubjectEngineering
  • BylineArticles whose byline prints “Wannes BH”
  • BylineArticles whose byline prints “Zaghouania BR”
  • BylineArticles whose byline prints “Dimassia W”