Research article · 10 Sep 2025
Conference abstractPublished 28 Jun 2018
Chemical modification of cellulose nanofibers from argentine cane tacuara (guadua angustifolia kunth)
CONICET-Universidad de Buenos Aires, Argentina; Universidad de Buenos Aires, Argentina
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
The growing demand for practice environmental sustainability has encouraged research into biodegradable polymers to minimize the environmental impact of conventional polymers. In this context, plant fibers, is an attractive material they constitute rich sources of cellulose1. Because cellulose is natural and renewable and its features resemble those of synthetic polymers, it could potentially replace its synthetic counterpart2. The cellulose nanofibers (NFC) based nanocomposites in the last decades there has been a growing interest, because its incorporation in the biomaterials generates an improvement in dynamic mechanical thermal properties, as well as tensile strength, toughness and elongation to break3,4. Nevertheless, the biggest problem of nanocelluloses in real applications is their hydrophilic nature. Nanocellulose cannot be uniformly dispersed in most nonpolar polymer media, its suspension is a gel-like structure at very low concentration, and it forms films or aggregates once dried. Consequently, nanocellulose modification is of interest in order to limit this phenomena and open-up new applications5. In this context, a new bio-material obtained from the chemical modification of a national low molecular weight polylactic acid (LMWPLA) synthesized in our laboratory with cellulose nanofibers is presented, using a synthetic route that consists of three reaction stages. The first one is the protection of the hydroxyl groups of the LMWPLA through a benzoylation reaction (PLABz), the second step involves the activation of carboxyl groups with thionyl chloride, and these latter groups react with the cellulose nanofibers (LMW-PLACEL) in the third stage. This new polymer will serve to be compatible with a hydrophobic PLA of high molecular weight (HMWPLA) to be use in the packaging manufacturing. Figure 1: NCF Cane Tacuara (Guadua angustifolia) Figure 2: Cross section Film CNF-PLA Recent Publications: 1. Lavoine, N., Desloges, I., Dufresne, A., & Bras, J. (2012). Microfibrillated celluloseeIts barrier properties and applications in cellulosic materials: a review. Carbohydrate Polymers, 90, 735-764. 2. Siqueira, G., Bras, J., & Dufresne, A. (2009). Cellulose whiskers versus microfibrils: influence of the nature of the nanoparticle and its surface functionalization on the thermal and mechanical properties of nanocomposites. Biomacromolecules, 10, 425-432. 3. Jonoobi, M., Harun, J., Mathew, A., Oksman, K. (2010). Mechanical properties of cellulose nanofiber (CNF) reinforced polylactic acid (PLA) prepared by twin screw extrusion. Composites Science and Technology. 70, 1742-1747. 4. Llanos, J., Tadini, C. (2018). Preparation and characterization of bio-nanocomposite films based on cassava starch or chitosan, reinforced with montmorillonite or bamboo nanofibers. International Journal of Biological Macromolecules. 107, 371-382.5. Afrain, S. Karim, Z. (2016). Isolation and Surface Modification of Nanocellulose: Necessity of Enzymes over Chemicals. Review. ChemBioEng.4, 1-16.
Subjects
EngineeringChemistryAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
More from this journal
The newest in Journal of Chemical Engineering & Process Technology.
Conference abstract · 18 Aug 2025
Sustainable biopolymers from agricultural waste for packaging applications
Conference abstract · 18 Aug 2025
Features and in vitro assessment of anti-coronavirus activity of organic paints on human lung fibroblasts
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Chemical Engineering & Process Technology
- SubjectEngineering
- SubjectChemistry
- BylineArticles whose byline prints “N Lis Garcia”
- BylineArticles whose byline prints “C.A. Rodríguez Ramírez”
- BylineArticles whose byline prints “N.B. D´Accorso”
