Scholars Central

Conference abstractPublished 28 Jun 2018

Bio-based thermosetting epoxy foam: Tannic acid valorization toward dye- decontaminating and thermo-protecting applications

Authors: N. Esmaeili, A. Salimi, M. J. Zohuriaan-Mehr, M. Vafayan, W. Meyer

Fraunhofer Institute for Applied Polymer Research (IAP), Germany; Iran Polymer and Petrochemical Institute (IPPI), Iran

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Bio-resourced thermosetting epoxy foam was synthesized to valorize a sustainable natural product (i.e., tannic acid) toward two different applications e.g., dye-decontaminating and thermo-insulating. Thus, an epoxidized tannic acid (ETA) foam was produced without use of organic volatile compounds or flammable foaming gases. The ETA rigid foam was characterized in terms of physical and thermal properties. The foam density, thermal conductivity and closed-cell content were examined. The polyhedral and closed-cell structure of the foam was also explored by scanning electron microscopy. Furthermore, thermo-stability was investigated to study the impact of the aromatic structure provided by tannic acid, which resulted in high char yield (49% in N2 and 48.3% in air) at 600 oC accompanied by high LOI (37.1 in N2 and 36.8 in air). The high thermo- stability and intumescent char yield along with low thermal conductivity makes the foam to be a promising thermoset for being used as an insulating material. Additionally, sorption of methylene blue (MB, as a model pollutant) onto ETA foam was kinetically investigated. The influence of contact time, ionic strength, solution pH, initial sorbate concentration and desorption were studied, which revealed the strong dependency of the sorption process to pH and initial sorbate concentration. The experimental data fitted well with the Langmuir isotherm (R2 = 0.997), yielding a maximum sorption capacity of 36.25 mg/g. The kinetic data pointed out that MB sorption could be represented by the pseudo second-order model. Overall, the novel ETA foam can be introduced as a candidate for removing cationic pollutants, thermal insulating applications, and self- extinguishing/intumescent materials. Recent Publications 1. Altuna FI, Ruseckaite RA, Stefani PM (2015) Biobased. Thermosetting Epoxy Foams: Mechanical and Thermal Characterization. ACS Sustainable Chemistry & Engineering 3:1406âÂ?Â?1411. 2. Xu Q, Wang Y, Jin L, Wang Y, Qin M (2017) Adsorption of Cu (II), Pb (II) and Cr (VI) from aqueous solutions using black wattle tannin-immobilized nanocellulose. Journal of Hazardous Materials 339:91âÂ?Â?99.3. Lang X, Shang K, Wang Y-Z, Schiraldi DA (2015) Low flammability foam-like materials based on epoxy, tannic acid, and sodium montmorillonite clay. Green Materials 3:43âÂ?Â?51. 4. Tondi G, Pizzi A, Olives R (2008) Natural tannin-based rigid foams as insulation for doors and wall panels. Maderas Cienciay Tecnologia 10:219âÂ?Â?227. 5. Esmaeili N, Vafayan M, Salimi A, Zohuriaan-Mehr MJ (2017) Kinetics of curing and thermo-degradation, antioxidizing activity, and cell viability of a tannic acid based epoxy resin: From natural waste to value-added biomaterial. Thermochimica Acta 655:21-33.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

More from this journal

The newest in Journal of Chemical Engineering & Process Technology.

All its articles

Conferences in this field

Upcoming conferences in this field.

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalJournal of Chemical Engineering & Process Technology
  • SubjectEngineering
  • SubjectChemistry
  • BylineArticles whose byline prints “N. Esmaeili”
  • BylineArticles whose byline prints “A. Salimi”
  • BylineArticles whose byline prints “M. J. Zohuriaan-Mehr”
  • BylineArticles whose byline prints “M. Vafayan”
  • BylineArticles whose byline prints “W. Meyer”