Scholars Central

Conference abstractPublished 7 Sep 2017

Influence of substitution of phenol by lignins in PF resins on the impregnation of kraft paper

Authors: Marion Thebault, Uwe Muller, Andreas Kamdelbauer, Edith Zikulnig-Rusch

Kompetenzzentrum Holz GmbH (Wood K Plus), Austria; Reutlingen University, Germany

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Decorative laminates are high density boards made of stacked Kraft papers impregnated with a phenolic resin that have been pressed and cured at high temperature. The quality of such laminates, in terms of avoidance of defects and mechanical properties, depends on the ability of the resin to impregnate the paper. The use of bio-based molecules such as lignins constitutes an eco-friendly and economic solution to substitute partially phenol, which is a toxic, in the resins polymers. The lignin materials, which are in the form of powder, have already relatively high molar weights according to their origin and need to be liquefied in the resin preparation. Such preparation provides different changes in the resin properties that can affect both the impregnability of the paper and the adhesive properties of the resin. In order to characterize the impregnation behavior of a resin with the porous substrate it is supposed to penetrate, measurements of conductivities of drops put on the surface of paper were carried out. Two lignins were tested: lignosulfonates and kraft, with two levels of phenol substitution. The effect of a phenolation pretreatment of the lignin material was also analyzed. According to their preparation (substitution level, lignin material, pretreatment), the resins drops penetrate Kraft paper relatively quickly. The more the phenolation substitution, the more a part of the liquid stays on the side the drop is put. The phenolation treatment of the Kraft lignin makes the resins penetrate the paper easier whereas the inverse behavior is observed when lignosulfonates are used. These results are compared with the visual observation of cross sections of impregnated papers and laminates made therefrom. The trend of resin to stay on the surfaces of paper rather than inside tends to make inhomogeneous cured layer in laminates and lower mechanical properties.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

More from this journal

The newest in Journal of Chemical Engineering & Process Technology.

All its articles

Conferences in this field

Upcoming conferences in this field.

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalJournal of Chemical Engineering & Process Technology
  • SubjectEngineering
  • SubjectChemistry
  • BylineArticles whose byline prints “Marion Thebault”
  • BylineArticles whose byline prints “Uwe Muller”
  • BylineArticles whose byline prints “Andreas Kamdelbauer”
  • BylineArticles whose byline prints “Edith Zikulnig-Rusch”