Scholars Central

Conference abstractPublished 7 Sep 2017

Developing thermoplastic films from wheat flours with different proportions of finely grinded bran

Authors: Paolo Benincasa, Franco Dominici, Debora Puglia

University of Perugia, Italy

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

The use of wheat flour to obtain bioplastics has been proposed about one decade ago. Recent works from our group demonstrated that tensile properties of thermoplastic films depend on wheat grain hardness and baking properties of refined flours, expressed as Chopin’s alveograph parameters (P, L, P/L, W). Moreover, we used wholegrain flours for producing bulk samples and found that the bran worked as a reinforcement, affecting tensile properties in function of the bran grinding level. This is of relevance being the bran a mill by-product to dispose of. This study was aimed at developing thermoplastic films from flours with different bran proportions.One refined wheat flour blend (F0, having P=64, L=99, P/L=0.65, W=182) from an industrial mill was mixed with three increasing proportions of finely grinded bran (treatments F1, F2 and F3, respectively). Roughly, F1 represented a wholegrain flour, F3 a grinding tail and F2 a mix 1:1 wt of F1 and F3. We tested several recipes and procedures, with progressive adjustments from that reported in Puglia et al, and measured film tensile properties (strength, ÏÂ?; elongation at break, Ã?µ (2) (Figure 1). By extruding the selected recipe (well defined proportions of wheat flour, glycerol, sorbitol, magnesium stearate, PVA/water solution) with a specific temperature profile (130-135-140Ã?°C), all flours gave films with ÏÂ?>2.0 MPa, while only F1 gave an acceptable Ã?µ value. To further modulate Ã?µ of films from F1, we investigated the blending with low melting biopolymers (PCL, PBAT) and plasticizer agents (citric acid). Results indicate that a 20-30% of PCL, plus citric acid, may give, even in presence of bran, a suitable deformation for crop mulching applications. All films were compostable and non-phytotoxic. Results open perspectives for using wholegrain flours to obtain rigid and semi-rigid films, or deformable films suitable for mulching.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

More from this journal

The newest in Journal of Chemical Engineering & Process Technology.

All its articles

Conferences in this field

Upcoming conferences in this field.

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalJournal of Chemical Engineering & Process Technology
  • SubjectEngineering
  • SubjectChemistry
  • BylineArticles whose byline prints “Paolo Benincasa”
  • BylineArticles whose byline prints “Franco Dominici”
  • BylineArticles whose byline prints “Debora Puglia”