Conference abstract
Thermal and mechanical characteristics of polypropylene/nanoclay nanocomposites
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
This paper addresses the effect of Nanoclay (NC) on the mechanical and thermal properties of polypropylene (PP) nanocomposites. Many researchers have considered layered silicate as a reinforcement for polypropylene in order to enhance its thermal and mechanical behavior. These enhancements can include higher moduli, increased strength and heat resistance, decreased permeability and flammability. Hence, nanoclays attracted interest due to the fact that they offer intercalation and exfoliation. Conventional composites usually require as much as 10-50% by weight of filler loading in order to divulge the desired mechanical or thermal properties to the original polymer, but organically modified layered silicates (organoclay) can achieve the same properties with typically 1-5% by weight of filler, thereby producing materials of lower density and better processability. It has been reported that the dispersion of such fillers at the level of a few nanometers induces a significant improvement in mechanical properties compared to the virgin polymer. In this study 5 different samples were tested. The influence of NC on the mechanical and thermal behavior of the nanocomposite was studied by Tensile, Nanoindentation, DCS, TGA, SEM and FTIR tests. The mechanical properties of strength, modulus and hardness of the nanocomposites increase with the addition of Nanoclay. TGA analysis showed no significant change in the thermal resistance resulted from NC addition.
Keywords
Subjects
NanotechnologyAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Nanomedicine & Nanotechnology
- SubjectNanotechnology
- BylineArticles whose byline prints “Saud Aldajah”
