Scholars Central

Conference abstractPublished 12 Sep 2016

Removal of sulfides and oil from produced water

Authors: Ana Karla Costa de Oliveira

Federal Institute of Rio Grande do Norte, Brazil

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Produced water are complex mixtures which contain a large number of contaminants including finely dispersed oil, metals, and gases such as H2S and CO2, that are originated from oil and natural gas. In this paper, we used solvent extraction to recover sulfides. We used three commercial amines belonging to the alkyl amine group as extractants, which were dissolved in aviation kerosene (JET FUEL). In this research, real samples of produced water from the oil industry with initial concentration of 0.660 mg/L H2S were used. The parameters studied were: Amine/JET FUEL ratio (0.25 v/v) and organic/aqueous phase ratio (1/3 v/v). After the tests, it was concluded that the highest extraction efficiency occurred with the amine Duomeen which removed 76% of sulfides, followed by Arquad 2C-75, showing 59% removal efficiency and Duommen T which removed 40%.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

More from this journal

The newest in Journal of Chemical Engineering & Process Technology.

All its articles

Conferences in this field

Upcoming conferences in this field.

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalJournal of Chemical Engineering & Process Technology
  • SubjectEngineering
  • SubjectChemistry
  • BylineArticles whose byline prints “Ana Karla Costa de Oliveira”