Research article · 13 Jan 2025
Conference abstractPublished 20 Sep 2018
E-BABE-Modal finite element analysis of the first global body in white Saudi car Gazal 1
Central Metallurgical Research & Development Institute, Egypt
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Modal analysis test the for first Saudi car Gazal1 was carried out. The chassis-alone modal analysis was made and its result for first torsional mode is 34.9 Hz (the target is >26 Hz) and for first bending mode is 38.2 Hz (the target is >26 Hz). Those results are in target. In general the chassis has a global good behaviour with high values of Eigen modes. The strain energy distribution is well distributed in the structure that will support the BIW (Body in white) upper structure. This is a good base for the complete global BIW (BIW+chassis) possible behaviour. Global BIW modal analysis was also made. The result for the first bending mode is 30.7 Hz which is in target (the target is >29 Hz). But the analysis does not reach the target for the first torsional mode 17.6 Hz (the target is >26 Hz), due to the weakness of the rear end area which consists of upper joint and lower joint. This analysis showed that the connection between the D pillar and the rear longitudinal member is weak and that the main problem is located in lower joint area. Hence, the connection with the rear panel has to be improved. An upper joint and lower joint sensitivity analysis was also made to understand which joint that has the highest influence on the body normal modes and, hence, to identify the areas where the design change activities should be focused. The sensitivity analysis shows that upper joint has the highest sensitivity for first torsional mode, while lower joint has the highest sensitivity for first bending mode. Knowing that, it is the first torsional mode that is out of target, then, the design change activities must be focused on the strengthening of upper joint.
Subjects
EngineeringAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
More from this journal
The newest in Advances in Automobile Engineering.
Perspective · 26 Dec 2024
The Role of Engine Design in Enhancing Combustion Processes
Perspective · 26 Dec 2024
Fuel Economy: Balancing Efficiency and Environmental Impact
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalAdvances in Automobile Engineering
- SubjectEngineering
- BylineArticles whose byline prints “Ahmad Gemeal”
- BylineArticles whose byline prints “Said Darwish”
