Scholars Central

Conference abstractPublished 19 Mar 2018

Sandwich panel with lattice core for aircraft anti-ice system made by Selective Laser Melting

Authors: Sara Varetti, Carlo Giovanni Ferro, Andrea Emanuele Maria Casini, Andrea Mazza, Paolo Maggiore, Mariangela Lombardi

Polytechnic University of Turin, Italy

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Additive Manufacturing (AM) technology offers the possibility to build strong and light components with complex structures, as lattice, optimizing the strength/mass ratio. The goal of this work is the characterization of an innovative sandwich panel with trabecular core made by Selective Laser Melting (SLM), used as heat exchanger for many industrial applications, for example in aerospace field. In this case study, the panel is integrated into the leading edges of aircraft wings and act as hot air anti-icing system and, at the same time, as impact absorber. The system, due to its lightness and shape, leads to the optimization of the heat exchange, the improvement of the thermal efficiency, and the reduction of fuel use and gas emission. A set of experimental and numerical tests is conducted on lattice specimens through a Design of Experiment (DOE). Different design parameters were varied to understand how they affect the mechanical and thermal behavior: six different cell shapes, varying cell size and volume fraction, were tested. The same experimental program is carried out for two different metal alloys: AlSi10Mg and Ti6Al-4V. Mechanical tests involve compression test on single core and on the whole panel, flexural and impact test. Further analysis on failure mechanism is carried out by observation with optical microscope. Thermal behavior of the system is also investigated by preliminary thermal simulations, whose results are validated by experimental measuraments of the temperature gradients on the external surface. Recent Publications 1. C G Ferro et al. (2017) A robust multifunctional sandwich panel design with trabecular structures by the use of additive manufacturing technology for a new de-icing system. Technologies. 5 (2):35. Doi:10.3390/technologies5020035.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

More from this journal

The newest in International Journal of Advancements in Technology.

All its articles

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalInternational Journal of Advancements in Technology
  • SubjectPhysics & Astronomy
  • BylineArticles whose byline prints “Sara Varetti”
  • BylineArticles whose byline prints “Carlo Giovanni Ferro”
  • BylineArticles whose byline prints “Andrea Emanuele Maria Casini”
  • BylineArticles whose byline prints “Andrea Mazza”
  • BylineArticles whose byline prints “Paolo Maggiore”
  • BylineArticles whose byline prints “Mariangela Lombardi”