Brief report · 29 Dec 2025
Conference abstractPublished 27 Jul 2015
Influence of electron beam irradiation onto physical and chemical properties of electrospun produced 3D matrices
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Electron beam irradiation (EBI) is widely used in industrial production for sterilization of medical products. We have evaluated the influence of EBI onto mechanical strength, chemical properties and biocompatibility of electrospun produced 3D matrices (EPM). Sheets of EPM with oriented fibers (fiber diameter 1μm, scaffold thickness 100 μm) or tubes (inner diameter 1.7 mm, wall thickness 100 μm) were prepared from nylon 6, polylactic-co-glycolic acid, polycaprolactone (PCL) and their mixtures with gelatin. Electron accelerator ILU-6 (2.2 MeV, 400 mА, 10 Hz) was used for EBI of the materials in doses 25÷150 kGy with increment 25 kGy. Mechanical strength/structure was tested using Zwick/Roell Z100 testing machine/JSM-6460 LV scanning electron microscopy and differential scanning calorimetry. Human primary umbilical vein endothelial cells (HUVEC) and gingival fibroblasts (HGF) were used to evaluate adhesion and proliferation of cells at the surface of EPM. It was observed, EPM irradiation in a dose of 25 kGy does not affect the mechanic properties of all matrices studied. Irradiation of EPM with a dose higher than 50 kGy leads to embrittlement of all matrixes except from those produced from PCL. A dose of 100 kGy increases the proportional limit of the PCL scaffold, significantly increase adsorption of the protein on the surface of PCL fibers and allowed to introduce durable regions by irradiating EP tubes through the template with open areas. EBI of the matrices does not interfere with the capacity of EPM to support adhesion, viability and proliferation rate of HUVEC and HGF at the surfaces of EPM as it was shown by cells labeling with calcein/propidium iodine and incorporation of ethylenedioxy uridine. Thereby an electron beam irradiation of EPM was show to be a useful instrument to modify mechanic/chemical properties of EPM.
Subjects
EngineeringAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
More from this journal
The newest in Journal of Tissue Science and Engineering.
Opinion · 29 Dec 2025
Biomaterials, Cells, And Stimulation For Spinal Cord Repair
Brief report · 29 Dec 2025
Cardiac Tissue Engineering: Building a New Heart
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Tissue Science and Engineering
- SubjectEngineering
- BylineArticles whose byline prints “Alena O Stepanova”
- BylineArticles whose byline prints “Chernonosova”
- BylineArticles whose byline prints “M V Korobeinikov”
- BylineArticles whose byline prints “A S Yunoshev”
- BylineArticles whose byline prints “A A Karpenko”
- BylineArticles whose byline prints “E A Pokushalov”
- BylineArticles whose byline prints “Vlassov V V”
- BylineArticles whose byline prints “P PLaktionov”
