Article · 19 Feb 2026
Conference abstractPublished 22 Jul 2019
The composition dependence on the phase stability and mechanical properties of the Ti-Nb-Zr thin
Gyeongsang National University, South Korea
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Statement of the Problem: Shape memory alloys are commonly used for various application, e.g., aerospace, automotive, robotics and biomedical. Ti-Ni alloys have been extensively applied for biomedical uses to date, but it has been pointed out that pure Ni is a toxic element and causes Ni-hypersensitivity. The β-type titanium alloys attracted to attention for bio-medical because of their low stiffness, good corrosion resistance and biocompatible. The purpose of this study is to investigate the addition of Zr elements dependence on phase stability and mechanical properties of the β Ti-Nb-Zr thin films. Method: The Ti-Nb-(3.6-12.7)Zr at thin films were prepared by magnetron sputtering method. The structures of the thin films were analyzed by EDS and SEM. Phase constitutions were confirmed by XRD. Mechanical properties of the Ti-Nb-Zr thin film specimens were investigated by nanoindentation test. The d-electrons alloy theory is an effective method of designing titanium alloys with a controlled Young’s modulus. Results: The additional Zr content does not change crystallographic in the ternary alloy,α and β phases appear at alloys. The porous structures were observed in Ti-Nb-3.6Zr and Ti-Nb-5.6Zr thin films. Young’s modulus decreased from 94.65 Gpa to 79.78 Gpa in ternary alloy with additional Zr content. Conclusion: The addition of the Zr to stabilize both α and β phases in titanium alloys, does not considerably influence the formation of α phases in TiNbZr alloy. In bulk, in order to control porous structure, there is used to space holder (NH4CO3) in sintering method. In the present, we expected to porous structure dependent on composition. The result of Young’s modulus confirmed to d-electro alloy theory for ternary alloy. However, Youngâ??s modulus of ternary thin films (80-95 Gpa) lower than binary alloys (108-123Gpa).
Subjects
EngineeringMaterials ScienceAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
More from this journal
The newest in Journal of Material Sciences & Engineering.
Perspective · 29 Dec 2025
Nanostructured Thin Films: Advancing Next-Generation Electronics
Brief report · 29 Dec 2025
Microstructural Defects: Impact on Material Properties and Performance
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Material Sciences & Engineering
- SubjectEngineering
- SubjectMaterials Science
- BylineArticles whose byline prints “Munkhbayar Baatarsukh”
