Scholars Central

Research articlePublished 2017

Effect of Strain Rate and Relative Density on the Compressive Deformation of Open Cell Ti6Al Alloy Foam through P/M Route

Authors: Mondal DP, Barnwal AK, Diwakar V

Journal of Applied Mechanical Engineering

Volume 6 · Issue 6 · Pages 1–13

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Open cell Ti6Al alloy foams of varying porosity fractions have been made using ammonium bicarbonate as space holder through powder metallurgy route. In order to provide the sufficient strength in green compacts 2% of wt.% PVA solution was mixed with elemental metal powder and NH4(HCO3) particle prior to cold compaction. Green pallets were sintered at three stages at three different temperatures 600°C, 800°C and 1100°C. XRD and EDX analyses confirmed that no residue of space holder remained in the sintered foam samples. The compressive deformation behavior of Ti6Al alloy foams with varying relative densities was conducted under different strain rates (0.01, 0.1, and 1.0 s-1). The plateau stress, the Young’s modulus and the energy absorption of the foam increase with increase in the relative density following power law relationships. But the densification strain decreases with increases in relative density following a linear relationship. The strain rate sensitivity and the strain rate sensitivity parameter of these foams were also examined, and it was found that the strain rate sensitivity parameters were varying in the range 0.034 to 0.078.

Subjects

Engineering

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalJournal of Applied Mechanical Engineering
  • SubjectEngineering
  • BylineArticles whose byline prints “Mondal DP”
  • BylineArticles whose byline prints “Barnwal AK”
  • BylineArticles whose byline prints “Diwakar V”