Article · 29 Dec 2025
Conference abstractPublished 17 Jun 2013
Penetration of Ni-P metal into polymer by electroless deposition utilizing supercritical carbon dioxide
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
The flexible and biocompatible properties of polymer make flexible polymer MEMS promising candidates for the next generation of micro devices. Polyimide has both wide service temperature range and strong resistance to organic solvents, and thus is suitable for applications in hostile environments and could be easily cleaned and sterilized by conventional methods. In neurodevices, the flexibility of polyimide can provide strain relief against forces of ?micromotion? between tissues and implanted devices. However, controlling the metallization on polymer in nano-scale level is necessary for manufacture of flexible bio-medical micro devices. Therefore, a novel jointing method between polymer and metal has been desired to provide the strain relief and the ability to control nano-scaled metallization on polymer. The most advantageous point of the electroless deposition method is the ability to form metal films on non-conductive substrate in ambient temperature. Also, the capability of metal to penetrate into polymer can affect the adhesion between the metal layer and polymeric substrate. For the reasons, the penetration of Ni-P metal into polymeric substrate via catalyzation in supercritical carbon dioxide (sc-CO2) and electroless plating in sc-CO2 emulsion, and diffusion of sc-CO2 into the polymer are studied. There are two major merits for applying sc-CO2 in the process of metallization on polymeric substrates, which are high self-diffusivity and good chemical affinity with polymer. Ni-P thin films were fabricated utilizing sc-CO2 emulsion with electroless plating following catalyzing in the sc-CO2 with Pd complex. According to the EDX analysis, an increase in the sc-CO2 catalyzation time led to increases in both the intensity and depth of the Ni-ion penetration depth into the polyimide substrate. We found that the impregnation reaction of Ni by our novel method is a sc- CO2-diffusion-controlling reaction. The high diffusivity of the sc-CO2 promoted the penetration of the Pd catalyst and Ni-P electroless plating solution into the polyimide substrate.
Subjects
ChemistryAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
More from this journal
The newest in Biosensors & Bioelectronics.
Brief report · 29 Dec 2025
Advancing Biosensors for Personalized Health Monitoring
Brief report · 29 Dec 2025
Hybrid Biosensors: Enhanced Detection for Health
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalBiosensors & Bioelectronics
- SubjectChemistry
- BylineArticles whose byline prints “Masato Sone”
- BylineArticles whose byline prints “Byung-Hoon Woo”
- BylineArticles whose byline prints “Tso-Fu Mark Chang”
