Conference abstractPublished 8 Sep 2014
Synthesis and characterization of high energy density piezoelectric ceramic composition for vibration energy harvesting
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Recent advancements in wireless sensing technologies have significantly reduced the energy required to operate the sensors. Piezoelectric materials are traditionally used to harvest mechanical vibrations and convert the mechanical energy into electricity. A high energy density piezoelectric composition x [Pb(Zr0.54Ti0.46)O3]-(1-x)[Pb(Zn1/3Nb2/3)O3 + y mol%MnO2 [where x = 0.7 to 0.9 and y = 1 to 3] was synthesized and samples were sintered using conventional ceramic processing route. Single and two step sintering profiles were employed. Bimorph energy harvesters were fabricated and tested at resonance frequency (~ 100 Hz) to record voltage output and power density of these devices. A piezoelectric figure of merit (FOM) was defined in order to compare energy density of compositions. The results of this study clearly showed that performance can be improved with optimization of materials composition, sintering technique, device geometry and device foot print. Micro structural characterization was performed using Scanning Electron Microscopy, Transmission Electron Microscopy and X-ray Photoelectron Spectroscopy. The fabricated devices will be useful to provide portable on-board battery charging solutions harvesting energy from mechanical vibrations.
Subjects
EngineeringAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Aeronautics & Aerospace Engineering
- SubjectEngineering
- BylineArticles whose byline prints “Vishwas N Bedekar”
