Scholars Central

Conference abstractPublished 5 Oct 2018

Advanced materials for seismic retrofit of existing reinforced concrete buildings with poor quality concrete

Authors: Marco Di Ludovico

University of Naples Federico II, Italy

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Recent devastating earthquake outlined the high vulnerability of existing reinforced concrete (RC) buildings to seismic actions. The lack of seismic detailing often led to the shear failure of unconfined beam-column joints or of short columns limiting the entire structural performances. Significant research effort promoted the use of composite materials as an efficient, cost-effective and easy to install retrofit solution. This led to a massive use of Fiber Reinforced Polymer (FRP) systems in the reconstruction processes following recent Italian seismic events (Lâ??Aquila, 2009; Emilia, 2012 and Central Italy 2016). Nowadays, these strengthening solutions are common in the design practice and simple and reliable design formulations are available. Although the FRP strengthening and other retrofit techniques allowed to significantly increase the seismic capacity of most of the damaged RC buildings by Lâ??Aquila earthquake, a significant portion of buildings were demolished due to the economic inconvenience of the retrofit solution, poor quality concrete or high residual drift. Thus the proper solution for the seismic retrofit of beam-column joints or columns with poor quality concrete using innovative solutions based on advanced materials is nowadays under investigation. The most recently developed design formulation for the FRP strengthening of beam-column joints are herein illustrated and the limits of this technique when applied to a poor concrete substrate are discussed. The effectiveness of an alternative retrofit solution consisting on the use of Fiber Reinforced Cementitious Composites (FRCC) is analyzed by experimental tests on two beam-column joints extracted from a real building damaged and demolished after the 2009 Lâ??Aquila earthquake. The use of advanced materials to define an innovative solution for the strengthening of columns affected by a quasi-brittle failure governed by the flexure-shear interaction is also discussed.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

More from this journal

The newest in Journal of Civil and Environmental Engineering.

All its articles

Conferences in this field

Upcoming conferences in this field.

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalJournal of Civil and Environmental Engineering
  • SubjectEngineering
  • SubjectEnvironmental & Earth Sciences
  • BylineArticles whose byline prints “Marco Di Ludovico”