Scholars Central

ArticlePublished 2016

The Repair Method of Damaged H-shaped Steel Members and Experimental Study on Recovery after Repair

Authors: Tomoe Onoda, Takumi Ito, Kenjiro Mori, Hiromu Fuse, Changhoon Choi

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Recently, there have been many discussions about repairability for damaged building structures after severe disasters. In japan, a technical manual for repairing damaged buildings has been established; however, its repair abilities have not been reported sufficiently. In this study, the Box-Shaped Repair Method which has been suggested on Japanese technical guideline is adopted for the damaged steel members, and its applicability and feasibility are investigated experimentally. Herein, the damaged portion on steel member such as plastic hinge or local buckling occurrence is covered with steel plate by welding. So the loading test is performed as parameters with section size of steel members, thickness of cover plate and welding size during repair process, and loading path. The procedure of this study is as follows; the first, the damaged test specimens of H-shaped steel member with local buckling are reproduced by initial loading test. Next, the damaged specimens with plastic residual deformation are returned to the original position. Finally, the loading test is done after repair. From test results, it is confirmed that the fundamental structural performance such as the rigidity, maximum strength, and absorbed energy after repair are improved by comparison of original state. And also, this performance can be controlled by adjusting the thickness of cover plate and welding condition. Furthermore, from the observation of test results, the analytical model of repaired steel member is suggested. From the comparison of test results, it can be said that the proposed model shows good agreements both test results and theoretical figure.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalJournal of Civil and Environmental Engineering
  • SubjectEngineering
  • SubjectEnvironmental & Earth Sciences
  • BylineArticles whose byline prints “Tomoe Onoda”
  • BylineArticles whose byline prints “Takumi Ito”
  • BylineArticles whose byline prints “Kenjiro Mori”
  • BylineArticles whose byline prints “Hiromu Fuse”
  • BylineArticles whose byline prints “Changhoon Choi”