Conference abstractPublished 29 May 2020
Design And Performance Evaluation Of An Indirect Solar Dryer
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
An attempt to minimize post-harvest losses of tomato that gluts in Mubi, Adamawa State, Nigeria in the months of August to October annually, an indirect solar dryer was designed, fabricated and evaluated based on meteorological data of mean monthly values of ambient temperature, wind speed, and global solar radiation, which were 22.2oC, 3.64 m/s, and 206W/m2 respectively. The designed dryer has a solar collector tilted at an angle of 20.26o to the horizontal with the air mass-flow rate and overall mean drying rate of 3.106 X 10-3kg/s and 0.140 kg/hr. It also had a lagging material of thickness 0.065m and an air volumetric flow rate of 0.115m3/s. Evaluation of the dryer revealed that within the studied months, the dryer requires 50.8 hours to dry tomato from a postharvest moisture content of 95.6% (d.b) to a storage moisture content of 15.8%(d.b). In the light of the tomato-fruit dryers developed and evaluated in other regions of the world, further researches need to investigate the effects of incorporating either an additional source of heat or a heat reservoir to ensure day and night time drying, which will further enhance the drying rate and consequently minimize drying duration.
Subjects
Agriculture, Food & AquaAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalGlobal Journal of Agricultural Research and Reviews
- SubjectAgriculture, Food & Aqua
- BylineArticles whose byline prints “B. Aliyu”
- BylineArticles whose byline prints “E. K. Bwade”