Scholars Central

Research articlePublished 25 May 2022

Effect of Disinfection on Some Mechanical Properties of Polycarbonate Base Material

Authors: Ali Saleh Hatem, Zainab Saleh Abdullah

Journal of Research in Medical and Dental Science

Volume 10 · Issue 5 · Pages 92–98

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Background: Dentists face a variety of serious challenges, including the need for ideal material in order to deliver successful dental care to patients. To produce an effective prosthesis with satisfactory appearances these materials should be biologically compatible, readily usable, inexpensive, and easy to manipulate with regulated technological procedures. Removable prosthodontics entails the use of a variety of tools and multipurpose products that are difficult to sterilize or clean, such as prostheses, impressions, and stone casts, which increases the risk of cross-contamination between both the dental clinic and the laboratory. Materials and Methods: Three NAOCL concentrations (0.25%,0.5% and 0.75 %) were used as determined by the pilot study, which yielded the most suitable results. A total of 200 sample were prepare and divided into 3 experimental group and a control group (2%chlorhexidine,0.25% and 0.5% NAOCL). Each group was subdivided into five identical subgroups. For each subgroup, ten specimens were utilized for each test (elongation percentage, shore D hardness, roughness, impact, color change). Results: The results of the tests showed significant decrease of Impact strength of the polycarbonate after immersion in (2% chlorhexidine) and it continuous decrease in (0.25% NAOCL) while the lowest mean value was for the (NAOCL 0.5%). The results of surface hardness showed significant slightly increase with (2% chlorhexidine) and decreased with (0.25% NAOCL), (NAOCL 0.5%) respectively. The results of surface roughness showed slightly increased values in (2% chlorhexidine) when compared to control group while increase when immersion in (0.25% NAOCL), (0.5% NAOCL) concentration respectively. The percent of elongation test showed the polycarbonate non-effected when immersed in (2% chlorhexidine) and decrease when immersed in (0.25% NAOCL), (0.5% NAOCL) concentration respectively. The results of color stability showed increased values in (2% chlorhexidine) when compared to control group and continuous increase when immersion in (0.25%NAOCL), (0.5% NAOCL) concentration respectively. Conclusion: The polycarbonate resin material can be safely immersed in (2% chlorhexidine) disinfectant solution without any damaging effect on surface hardness, surface roughness, percent of elongation and color stability. As well, immersion in (2% chlorhexidine) was preferable than NAOCL disinfectant solution in comparison to the control group.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalJournal of Research in Medical and Dental Science
  • SubjectDentistry & Oral Health
  • BylineArticles whose byline prints “Ali Saleh Hatem”
  • BylineArticles whose byline prints “Zainab Saleh Abdullah”