Research articlePublished 3 May 2019
Electrochemical Behavior of Reinforcement Steel in Simulate Concrete Pore Solution with and without Chloride Ions
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Reinforcement steel working electrode was used in electrochemical tests (EIS and PDP) after 0 h and 24 h immersion in SCP solutions (saturated Ca(OH)2) maintained at 30°C with and without various [Cl-]. EIS data obtained both at 0 h and 24 h immersion revealed that at 0.01 M<[Cl-]<0.10 M, steel resists corrosion more than the Cl- free solution, while at [Cl-] ≥ 0.10 M steel corrosion rate increases appreciably. PDP data showed that at (i) [Cl-]<0.05 M for 0 h immersion and (ii) [Cl-]<0.2 5 M for 24 h immersion, steel resists pitting corrosion even if it was polarized to the oxygen evolution potential, indicating film formation of corrosion products on the steel surface which becomes more denser with increasing immersion time. Accordingly, the CTL and the corresponding ratio ([OH]/[Cl-]) of steel in SCP solution varied with the immersion period as well as with the techniques used.
Subjects
Pharmaceutical SciencesAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalDer Pharma Chemica
- SubjectPharmaceutical Sciences
- BylineArticles whose byline prints “Ehteram A Noor”
- BylineArticles whose byline prints “Aisha Al-Moubaraki H”
- BylineArticles whose byline prints “Dalal I Al-Masoudi”