Article · 26 Aug 2026
Research articlePublished 30 Dec 2018
Effect of Addition of Silanized Silicon Carbide Nanoparticles on Some Physical Properties of Heat Cured Acrylic Denture Base Material
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Statement of the Problem: Polymethyl methacrylate (PMMA) is the most popular material used for denture fabrication. This material is away from ideal in justifying the mechanical requirements such as poor thermal conductivity, insufficient surface hardness, increased surface roughness and lower mechanical properties. Aim of the Study: The researcher aims to study the effect of addition of surface treated (silanized) silicon carbide SiC nanoparticles in percentages of 0.125% wt. and 0.25% wt. on physical properties of heat cured acrylic resin denture base material. Materials and Methods: One hundred fifty (150) specimens were divided into five groups according to the tests, each group consisted of 30 specimens and these were subdivided into three groups: Control group, Reinforced PMMA (0.125% wt. SiC nanoparticles) group and Reinforce PMMA (0.25% wt. SiC nanoparticles) group. The thermal conductivity, impact strength, transverse strength, surface hardness (Shore D) and surface roughness were investigated. Results: The results of this study showed at 0.125% wt. SiC nanoparticles there is highly significant increase in both thermal conductivity (0.8188 W/m.K) and surface hardness (87.40) while there was non-significant decrease in transverse strength (86.98 N/mm2), impact strength (7.572 KJ/m2) and surface roughness (1.345 μm) when added to PMMA denture base material. At the concentration of 0.25% wt. SiC nanoparticles the results showed highly significant increase in both thermal conductivity (0.9723 W/m.K) and surface hardness (89.34) while there is non-significant decrease in transverse strength (85.79 N/mm2), impact strength (7.234 KJ/m2) and surface roughness (1.344 μm) when added to PMMA denture base material. Conclusion: The addition of silicon carbide nanoparticle into acrylic resin denture base material improves thermal conductivity, surface hardness and surface roughness; while there is non-significant decrease in both transverse strength and impact strength.
Subjects
Dentistry & Oral HealthAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
More from this journal
The newest in Journal of Research in Medical and Dental Science.
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Research in Medical and Dental Science
- SubjectDentistry & Oral Health
- BylineArticles whose byline prints “Ahmed S Kamil”
- BylineArticles whose byline prints “Hikmet Jameel Al-Judy”