waste, was used to modify titanium dioxide (TiO2) photocatalyst via sol-gel microwave technique with sintering. Effects of lignin-based carbon modification were investigated on their morphology (by field emission
studied .Established powder metallurgy technique is used in the processing phase. The effect of SiC addition on the density of Al, densification parameters of Al sintered functionally graded materials
based nano-powder were deposited on Ti6Al4V implants by using elestrospray deposition technique. Electrospray coated samples were sintered under high vacuum by RF (radio frequency). After sintering process surface…
series of aluminum-titanium carbide (Al-TiC) alloys was manufactured using mechanical alloying technique at different sintering temperatures, namely 900, 1100, and 1300 ºC. The effect of sintering temperature
high voltage electric contact heat sink materials etc. Mechanical alloying accomplished by compaction, sintering and extrusion techniques were used to prepare the composite. It is necessary to know the tribological…
fabrication of the Mg/HA/TiO2/MgTiO3 nanocomposites using a blend-cold press-sinter powder metallurgy technique. X-ray diffraction, X-ray photoelectron spectroscopy, transmission electron microscopy, atomic force…
meet the current needs of many of these applications. Current selective laser sintering (SLS) based techniques typically produce structures with less than wrought mechanical properties. While direct laser melt
method of fabrication of MMNCs is quite a challenge, which includes processing techniques like Spark Plasma Sintering (SPS), etc. The objective of the present work is to fabricate aluminium based
based powder, are mainly applied in high-temperature 3D printing. The techniques including Selective Laser Sintering(SLS), Selective Laser Melting(SLM). NdFeB is the organic-based composites The purpose
manufacturing technology for creating sophisticated and bespoke 3D objects. Several 3D printing techniques such as selective laser sintering, fused deposition modeling, polymer jet deposition, granular materials binding…
powders with the rapid densification rates characteristic of spark plasma sintering (SPS). Further single crystals obtained by hydrothermal technique with their principle and optical applications will be discussed. An…
method of fabrication of MMNCs is quite a challenge, which includes processing techniques like Spark Plasma Sintering (SPS), etc. The objective of the present work is to fabricate aluminium based
that of lead oxide ((Pb3O4)) and ZrO2. The morphological investigations (using SEM technique) of pre- and post-sintering powder show elongated (rod like) nanoparticles. The particles are agglomerated and thicker
eutectic sintering aids, and liquid-phase sintering. Findings: The present research addresses a combination of these techniques in production of SiC-based structural ceramics including selection of additives based…
eutectic sintering aids, and liquid-phase sintering. Findings: The present research addresses a combination of these techniques in production of SiC-based structural ceramics including selection of additives based…
SrxBa1− xNb2O6 [SBN] for x =0.4 and 0.5, prepared by traditional sintering method (solid state reaction technique). The tetragonal tungsten bronze type crystal structure, structural parameters such as the lattice
Three aluminum-titanium carbide (Al-TiC) alloys were manufactured using mechanical alloying technique at 1300 ºC as sintering temperature. The effect of increasing the carbon content on the corrosion
characterization of shape memory alloys fabricated from conventional techniques, not much work involving the uses of spark plasma sintering is available. In this study, Ti-30Ta and Ti-30Zr based ... pressure and powder…
also essential in such materials to keep the anisotropic microstructure of specimens after sintering and to optimize amount, organization and size of the occurred mullite phase. Moreover, adding a slight ... flash…
article is to present a current review of the various printing techniques, including stereo lithography, selective laser sintering, photopolymer jetting, and powder binder printers and fused deposition modelling…
Direct Metal Laser Sintering (DMLS) and Selective Laser Melting (SLM) are an Additive Manufacturing (AM) technique that produces complex three- dimensional parts by adding layer up on layer of powder
Spark Plasma Sintering (SPS) is an advanced consolidation technique that efficiently densifies powders using pulsed DC current and pressure at lower temperatures and shorter durations than conventional methods. It…
array of techniques. All the glasses were prepared by melt-quenching technique while GCs were produced by sintering of glass powder compacts at the temperature ranges from
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.