terminal defect models were established and simulated in the static electric field utilizing the finite element method. Triangle and isosceles trapezoid models were established to simulate the incised defects
tension generation on a molar tooth and adjacent structures by three-dimensional finite element models. Methods: A tridimensional model composed of an inferior molar tooth and surrounding structures was fabricated
stresses is a vital part of an underground excavation design. In this study, the finite element method is used to develop and establish a full three-dimensional numerical model using
Based on the thermo elasticity, using finite element method to analyze the stress of femur-prosthesis system when the hip joint has been replaced, a reference for the selection
working device by using the mechanical theory and method. The static strength finite element analysis of excavator boom was carried through by using ANSYS, from which, the stress and strain ... work condition were…
giving specific configuration to the towline. This work consists of the development of a finite element program for the dynamic analysis of underwater towed cable and its tow characteristic
effects of coating on the thermal behaviours of the pistons are investigated. The finite element analysis is performed by using computer aided design software. The main objective is to investigate ... real engine…
paper represented numerical calculation of frequency sensitivity of a SIW device using finite element.The finite element method (FEM) has been shown to be an efficient and flexible way for computing
This paper presents the finite element analysis of the dynamic crack propagation in brittle material namely, Gray cast iron. The analysis is done by using remeshing technique. Dynamic fracture deals
analyzed according to the guidelines given in Div 1 and Div 2. The finite element analysis for different configurations of pressure vessel on saddle supports is done using ANSYS
validate the currently modified composite wall of induction furnace for required heat transfer using Finite Element Method (FEM) considering transient heat conduction and to perform the structural analysis
contact stresses in the patellofemoral compartment following an articular chondrocyte implantation (ACI). A finite element (FE) model of the patellar femoral joint was created and dynamic non-linear analyses were
kind of two-dimensional semilinear parabolic equation is presented by two-gridmethods for nonconformingmixed finite element. The corresponding convergence analysis is presented and the error estimates are obtained…
loop, Nance appliance, and Trans-palatal arch) subjected to masticatory forces with 3D Finite Element Analysis is a three dimensional digital solid model was prepared with a Solid Edge ... deformation range for the…
synthetic gelatin with bioactive glass particles. As a critical issue encountered in simulation and finite element modeling is the generation of the finite element model, a model was built ... Computer Aided Design…
investigate the biomechanics of the pelvis reconstructed by modular hemipelvic prosthesis using finite element (FE) method. Methods: A three-dimensional FE model of the postoperative pelvis was developed and inputted
torsion and axial deformation of the shaft, besides the gravitational and gyroscopic effects. The finite element method was used to discretize the structure into hollow cylindrical elements with 12 degrees…
have significant effects on the resonant property and sensing ability. This research uses the finite-element method (FEM) to direct further improvement of the PZT resonator. Displacement, stress, strain
Abstract Study Design: Biomechanical study using a finite element model of the lumbar functional spinal unit (FSU). Objectives: To compare the biomechanics of a novel in situ expandable posterior lumbar ... traditional…
with specific porosity, pore size, characteristics that influence the behavior of the incorporated cells. Finite element Methods (FEM) and Computer Aided Design (CAD) combines with manufacturing technologies such as…
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.