Electro-anodization of thin Ti film deposited on glass substrate by RF sputtering technique was employed to fabricate TiO2 Nanotubes (TNTs) annealed from 350°C to 650°C. The morphological
annealing, which is incompatible with a flexible background. Alternative low-temperature techniques e.g. magnetron sputtering, photochemical activation by UV and atomic-layer plasma-assisted deposition (ALD) are…
level of 2*1019m-3 one can reduce the mirror sputtering to the target level of 1nm per full power year or all input parameters considered the erosion rate
harvesting, hydrogen storage and environmental waste management. In terms of production techniques, RF magnetron sputtering has been well established and has demonstrated high performance devices, as ALD. However, these…
Amorphous oxide thin film transistors (AOTFT) have been fabricated by RF (Radio Frequency) magnetron sputtering with the bottom gate structure. AOTFTs exhibited to change stability under the bias and temperature
susceptibility and the weakening of the magnetic behavior of fine coal. Analysis of different sputtering times indicates the different depths from the surface. During the microwave treatment, pyrite
films were then deposited on the GZO films by direct current magnetron sputtering (DC-MS). The GZO interface layers with a preferential c-axis orientation play a critical role
type Si substrate using modified thermal chemical vapor deposition (TCVD) assisted by sputtering deposition followed by thermal oxidation under controlled growth conditions. The effects of fabrication parameters on…
carried on in the range of less than 100 nm thickness through magnetron sputtering. The tandem accelerator facility was used to exploit the 5 MeV Cu ion source with variable
silicon/graphite/metal oxide thin films are produced using chemical vapour deposition (CVD) and sputtering techniques as potential anode material for lithiumâÂ?Â?ion batteries. The xâÂ?Â?ray diffraction
induced defect transition in Si can be understood in terms of oblique incidence induced sputtering process dominated by nuclear energy loss. Such low energy oblique irradiation induced alterations
atomic polarizability of the element M. The emission process for the re-sputtered species M0 is decoupled from the MA+ ion formation process, in analogy with the ion formation
densification mechanisms are particularly interesting, given its specific physicochemical mechanism of spark generation and sputtering effects during neck formation between powder particles. Densification mechanisms are…
thin films in nanometer rage were deposited at room temperature by RF reactive magnetron sputtering. It was found that stress is compressive in nature and varies
thin films in nanometer rage were deposited at room temperature by RF reactive magnetron sputtering. It was found that stress is compressive in nature and varies
super-hydrophilicity. Visible light-activated TiO2 doped with SnO2 could be prepared by RF sputtering, nonmetal doping or sensitizing of TiO2 doped with SnO2. This paper reviews preparation methods
Magnetic Co3Pt films were sputtered on a Ru(0002)/Pt(111) bilayer on glass substrate at room temperature. The effects of a Ru buffer layer thickness (t nm) on magnetic
films are deposited directly on thermally oxidized Si substrate at ambient temperature using magnetron sputtering. The as-deposited a-CoFeB262 (100 nm) film exhibits magnetic stripe domain and transcritical hysteresis
vacuum spraying, doped with molybdenum; silicon-diamond films deposited on titanium substrates; platinum, sputtered on titanium substrates. This work was partly financed by the Ministry of Education and Science
TiO2]0.08 insulating films were prepared on Si ( , p- type) substrates, by RF sputtering method, at room temperature. Direct current (DC) conduction measurements on the prepared samples were carried
Nano-crystalline thin films of this semiconductor can be fabricated by room temperature RF sputtering process to produce various devices such as, diode and thin film transistor (TFT). These devices
substrate. First, a 20 nm layer of Pt (111) is epitaxially grown by sputtering on a α-Al2O3 (0001) substrate and then introduced into the fisher reactor containing
хAlxN, and TixZr1-хN layers were deposited by various methods: magnetron sputtering, CAE and the combination of these methods. Тhe methodology of studying the phase and elemental composition, texture, microstructure
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.