study focused on the development of a methodology for the preparation of photocrosslinked polymer-ceramic composites based on polyvinylpyrrolidone (PVP), gelatin (GE), sodium alginate (SA), while the ceramic phase…
This compilation of research addresses significant advancements in ceramic composites, covering novel processing techniques, the development of high-performance materials for extreme environments, and the impact of…
ceramic composites, combining ceramic materials with biological components, are increasingly used in biomedical applications due to their superior properties such as biocompatibility and mechanical strength. The…
Сermets (metal-ceramic composites) are modern construction materials used in different branches of industry. Their toughness and heat resistance are determined by their elastic and thermo-physical properties. In…
Polymer-ceramic composites are gaining importance due to their high specific strength, corrosion resistance, and high mechanical properties as well as low cost. As a result Polymer composites are suitable…
purpose of this work was searching of the formation of grain boundaries in metal-ceramics composites at various metal concentrations and sintering temperatures, influence of these boundaries on elastic moduli ... work…
several matrices and/or respectively; that is the case of the glasses and glass-ceramic composites. Thus, inside the “non-metal or inorganic composites”, both glasses and glass-ceramics which ... have given rise to the…
technology. In this research a typical nose cone with different Ultra High Temperature (UHT) ceramic composite TPS materials like Hafnium diboride (HfB2) and zirconium diboride (ZrB2) is analyzed and compared
However, as ceramic material, the inherent brittleness acts as an obstacle for its further application in the extreme environment. Therefore, an excellent reinforcement for the wave-transparent composite is required…
composites cermets are a combination of ceramic and metallic materials and these new materials have different properties that their precursors materials. In this work, the fabrication route of the composite ... Al2O3 /…
media have not been observed. All composite materials were characterized by similar surface roughness which was a result of the presence of the ceramic phase ... hydroxyapatite) in all tested materials. Conclusion &…
four-phase-model method is used to study residual stress field of composite ceramic with eutectic interphases. Considering matrix, interphase and fiber inclusion are isotropy, the residual stress distribution…
improved mechanical properties and eco-friendliness. This presentation describes microwave application to fabricate metal-ceramic composites by molten metal infiltration and reaction bonding in-situ process. Metal…
protection superior to a 7 mm suit. Next, adding a further outer layer of ceramic composite produced the K2 suit. The K2 increased thermal protection and improved ergonomics and handling ... worsened handling. Hence, we…
purpose of this comprehensive review was to evaluate and identify the performance of composite/ceramic onlays versus crowns. The strength of the evidence is based on published trials, systematic reviews
part of a wide investigation on processing of mullite and mullite-based ceramic composites from these precursors. Pure kaolinite and alumina mixtures in stoichiometric molar ratio of mullite (3Al2O3. 2SiO2 ... mullite…
Administration (FDA) as safe for body contact. The mineral phase constituted HA. A innovative composite was prepared and subjected to detailed physicochemical analysis. Additionally, the system was modified with…
Electrochemical characterization was conducted on poly(vinyl alcohol) (PVA)-ceramic composite (PCC) separators for supercapacitor applications. The PCC separators were fabricated by mixing various ceramic particles…
Fire is a dramatic issue in aircraft nowadays, especially with composite air crafts. An additional issue is the dangerous use of flammable Li-Ion batteries in a lot of appliances ... well than cargo container able to…
desalination of highly saline waters that it can enhance desalination performance using CNT/ceramic composite membrane. In this work, the membrane is composed of a homemade ceramic support made
Binder-jet 3D printing responses of sea-shell powder based ceramic composites have been evaluated considering the material consolidation mechanisms and mechanical characterisations. Initial experimental printing trials…
study focused on the use of manganese-zinc ferrite-bioglass and glass ceramic composites. By this point of view, the potential scientific work is worth searching due to its originality
Functionally graded materials are a ceramic metal composite which transition from metal on one face to ceramic on the opposite face. In a functionally graded material both the composition
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.