This paper focuses on studying the pitting corrosion tendency of austenitic stainless steels (SS 316 L and NIT 60) and carbon steel (API 5 LX 60) in the presence ... elemental sulfur. The pitting corrosion tendency of…
Localised corrosion such as pitting is the main limiting factor in determining the service life of pipelines. Pipelines in marine environment are often treated with an out of sight ... pipeline (6 o’clock position)…
evaluated by the mass loss and the thickness loss of the specimens while the pitting corrosion is counted by the super-high magnification lens zoom 3D microscope. In terms ... simulation, the atmospheric uniform…
time and the stronger the corrosivity was, the shorter time it took to get corrosion pits, which enhanced the sensibility to corrosion time. To research the impact of irregular surface ... friction coefficient is; the…
sulfate are often found at anaerobic pitting sites. Many laboratory pure-culture SRB pitting corrosion data have been reported and they are often less than or not much greater than ... have been reported in the…
Passivity, its stability and breakdown, leading to localized corrosion such as pitting is the most important phenomenon for austenitic stainless steel in vivo solution. Because growth of it helps ... aggravate other…
Pitting potential was used recently to assess the aggressiveness of the biological species in the microbial corrosion of aluminum alloys in hydrocarbon/water systems. This parameter is analysed here ... oxide film by…
prediction models have been proposed for two different cases 1) General corrosion model 2) Pitting corrosion model under five different exposure conditions. Concrete covers, bar diameter, water to cement ratio
alloy. Coating was formed using two different FSP tools. Metallography, micro compositional analysis, and pitting corrosion tests dynamic polarization studies were used for characterizing the surface composite coating…
surface of mild steel and undergoes with corrosion reaction. Metal exhibits galvanic corrosion, pitting corrosion, crevice corrosion, and stress corrosion. The concentration of SO2 gas is increasing
metal ,the cyclic potentiodynamic tests indicated that only SS316 and aluminum specimens suffer from pitting corrosion and PANI coating reduces the pitting area of the hysterias loop with pushing
biocompatibility and mechanical integrity. The aim of this research is to compare the electrochemical corrosion behaviour of two biomedical alloys, 316L and 316LVM stainless steels in simulated body fluid ... study…
such as low density, good appearance and corrosion resistance. However they are susceptible to pitting corrosion when exposed to various acidic, alkaline and neutral media. The sputtered-deposited alloys, either
other hand, a concentration of 10-4 M BTAH acted as a promoter of pitting corrosion of the alloy in the above medium. The results of optical and scanning electron
corrosion resistant coatings used conventionally are susceptible to degradation, leading to pitting corrosion. This report summarizes the corrosion resistant nature of thin films of Cu-TiO2 coated on mild steel
There were severe pitting corrosions on the surface of transmission gears in diesels. The cause of metal fatigue pitting of gear surface is analyzed in the paper, which based
acid concentration and rising temperature. The presence of OS extract inhibit the general and pitting corrosion of aluminum in HCl solutions. This effect was remarkably increased by increasing the concentration
some limitations like degradation of the coatings and improper coatings which may lead to pitting corrosion. The nanocomposite corrosion resistant coating can overcome this problem. The SiO2 nanoparticles are synthesized
effluence and contamination in compressed gas cylinders during storage and transportation resulting into localised pitting corrosion of the storage and conveying metal is a major challenge
situations where the chloride ion concentration at the reinforcement surface crosses the critical level, pitting corrosion is induced. Such corrosion processes are causing a great loss to structures worldwide
well as salt fog exposure test for 30 days in 3.5% NaCl solution. Improved pitting corrosion resistance was found in case of the harmonic structured steel as compared to that
pore solution on nature of passive film is established. A wide variation in corrosion and pitting tendency of rebars in different conditions is caused due to changes in nature ... rise in temperature transforms the…
immersion and (ii) [Cl-]<0.2 5 M for 24 h immersion, steel resists pitting corrosion even if it was polarized to the oxygen evolution potential, indicating film formation of corrosion
extracellular polymeric substance, as well as bacteria adhered to a porous layer of corrosion products. Elemental analysis by EDS detects the presence of calcium carbonates, iron oxides, iron oxyhydroxides supporting…
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.