body temperature and protects the body from abrasion and water loss. The Young’s Modulus of skin is measured as a ratio of the stress applied to the skin ... vivo over the skin deformation. Skin is found to be highly…
Objective: To investigate the maximum Young’s modulus (SWE-max) of thyroid nodules using twodimensional Shear Wave Elastography (2D-SWE) in thyroid nodules. Young's modulus is a measure ... examinations were performed…
activated carbon produced was analyzed in terms of crystallite parameters, specific surface area, Young’s modulus (E) and spring length (SP) between two cubic granular volume microstructures. The crystallite parameters…
that with increasing KOH concentration, the weight loss of the sample markedly decreased. The young modulus (E) showed that 0.25 M has a higher value of 10.6 GPs than
bone area is available through Computer Tomography. There is the relation between Young’s modulus and radiographic density (expressed in Hounsfield’s units) using an intermediate relation of mineral density…
particle size of TiO2 nanoparticles were ready by resolution casting methodology. Mechanical lastingness, Elongation, Young modulus, Thermal conduction, water absorption, and FTIR analysis were studied for mix and…
load. The double iteration for incorrect fitting indentation modulus to Hook's law Young's modulus of a standard with up to 11 free parameters must be cancelled and discontinued
soil has been assumed first elastic with individual random variables such as Young’s modulus and Poisson’s ratio simultaneously. After the elastic displacement, known the plastic analysis conducted
carbon pellets (SCPs) were carried out in terms of crystallites dimensions, lattice constant, Young's modulus, and volumetric strain experience. The Young’s was also estimated from the crystallites dimensions…
their results. The elastic modulus EISO from unloading curves as hitherto unduly called "Young's" modulus has nothing in common with unidirectional Young's modulus according to Hook ... contributions from all crystal…
evaluation of the degradation profile of these membranes were carried out. Tensile strength, Young’s modulus and elongation at break for amnion and chorion membranes were tested using universal testing ... amnion…
used for various applications, e.g. aerospace, automotive, robotics and biomedical. Presence of low Young’s modulus and biocompatibility factors are two important criteria in biomedical applications. Although Ti-Ni SMAs…
testing machine. Biomechanical properties were assessed by the force at rupture and the Young's modulus. Results: All investigated methods of UV-A cross-linking led to an increase ... force at rupture and the Young's…
testing machine. Biomechanical properties were assessed by the force at rupture and the Young's modulus. Results: All investigated methods of UV-A cross-linking led to an increase ... force at rupture and the Young's…
from an incomplete sintering (from 2% to 45% of the ceramic matrix volume). Young’s modulus is measured on a classical three-point bending setup. A good agreement is found ... between an existing analytical model and…
Objective: The mechanical behaviour or the Young’s Modulus of the skin is measured as a ratio of the stress applied to the skin in vitro or in vivo over ... skin deformation. The Young’s Modulus of skin is an important…
increases, leading to decrease of the plate stiffness and hence, natural frequency, as the Young modulus of Al2O3 is equal to 380 GPa and the Young modulus of SUS304
litter products, due to its adsorbent and clumping properties. Introduction A low Young’s modulus and biocompatibility are two important criteria for biomedical applications. Stainless steel and Co-Cr alloys…
explored. For that reason, we present an ab initio study about properties such as Young Modulus, Poisson ratio, band gap and formation energy relative to nanowires sizes diameters. In order ... case of ZnO/shell…
particle size of TiO2 nanoparticles were ready by resolution casting methodology. Mechanical lastingness, Elongation, Young modulus, Thermal conduction, water absorption, and FTIR analysis were studied for mix and…
structure is found to be most stable structure. The value of cohesive energy, Young’s modulus and shear modulus has been computed and all the values (except poisson ratio
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.