performing power factor compensation in commercial power systems, due to the proliferation of harmonic producing-loads. This paper presents an intelligent controller for power factor compensation that can perform power
respective control scheme are proved by simulation and experimentally. The filter can compensate for harmonic current, power factor and load unbalance. A power filters which has been used there monitors
Power Compensator (DPC) is proposed in this paper to eliminate the harmonic currents, compensate power factor and voltage unbalance problems created by the nonlinear loads present in three phase systems ... back to back…
order to improve the power factor, mining enterprises used a large number of parallel capacitor, but its harmonic current is larger, aiming at this phenomenon, the paper used the method ... system harmonic. There…
such as T2 operating at different power factors i.e.0.91, 0.92, 0.94, 0.96 and 0.98 leading, respectively) and incorporated static synchronous compensator (STATCOM) with different load models (DLMs) such as constant…
tracer (ILST) control algorithm for different functions of DSTATCOM such as reactive power compensation for power factor correction, harmonics elimination, and load balancing under nonlinear loads. This control scheme…
based on Instantaneous Reactive Power Theory (IRPT) control algorithm by which reactive power compensation and power factor correction is done and also real power support is provided by renewable energy
filter to work under non stiff source. The method proposed compensate non linear load by improving the power factor to the desired value and also eliminate the harmonics under distorted ... presented for proper sequence…
most important power system components for reactive compensation of power and Voltage stabilizing capability. In this paper we have a 6 BUS power system with a variable speed wind generator ... MATLAB PSAT environment…
deter mine the shunt compensation at the load end to maintain the load voltage at a fixed percentage of the sending-end voltage, the maximum power transfer limit that ... influence of various factors such as the line…
with a zig-zag transformer is used for the compensation of reactive power for voltage regulation or for power factor correction along with load balancing, elimination of harmonic currents
hybrid filter load, Total Harmonic Distortion (THD) is reduced and power factor is improved. This method improves passive filter compensation characteristics without depending on system impedance, avoids the danger…
supply currents. The load balancing, harmonics elimination and the neutral current compensation are demonstrated along with unity power factor (UPF) and zero voltage regulation (ZVR) modes of operation. The DSTATCOM
current-related power-quality problems such as reactive-power compensation, harmonics elimination, and load balancing in power factor correction (PFC) mode and zero voltage regulation (ZVR) mode. Improved responses…
DSTATCOM (Distribution Static Compensator) is an important device for correcting power factor, to maintaining constant distribution voltage and to mitigate harmonics in a distribution network. There are many industrial…
MATLAB/SIMULINK model, the proposed system can provide the power factor correction, harmonic elimination, load balancing, and reactive power compensation and simultaneously inject the maximum power available from
ensures that unity power factor (UPF) is achieved at the load terminal during nominal operation, which is not possible in the traditional method. Also, the compensator injects lower currents ... voltage disturbances…
This SEPIC will act in DCM (Discontinuous conduction mode) mode to achieve almost unity power factor in a simple and effective manner. The DCM operation gives additional advantages such ... voltage. The integral…
conduction.This SEPIC will act in DCM(Discontinuous conduction mode) mode to achieve almost unity power factor in a simple and effective manner. The DCM operation gives additional advantages such ... voltage. The…
logic network based power system stabilizer and the parameters of the optimum stabilizer , i.e. gain factor as well as time constants of the lead/lag compensator, are the outputs
Power Compensation. Reactive Power Compensation in Electric Power Systems is usually studied as constrained Single-Objective Optimization Problem where an objective function is a factor of transmission line losses only…
electricity market, it may always not be possible to dispatch all of the contracted power transactions due to congestion of the transmission corridors. This paper presents a transmission lines congestion…
distribution losses has been achieved by compensation of active and reactive powers. The improvement in bus voltage profile and the optimal power factor of the DGs have also been considered
equipment utilization of the compensation capacitors. The life cycle economy of the reactive power planning scheme is one of the important factors in power markets. So the mathematical model
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.