Scholars Central

Conference proceedingPublished 9 Nov 2021

Polysaccharides as environmental friendly additives for modification of the rheological and filtration properties of drilling muds

Authors: Ibtisam Kamal, Aryan Muzhafar

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Drilling muds are one of the most important components of drilling operations. They are suspension of solids in either water or oil, which can be mixed with other substances, called additives. The drilling fluid functions should be optimized to ensure safety and minimum whole problems which are extremely costly in terms of materials and time. There are several additives used to ensue getting the appropriate functions of drilling fluids. The incorporation of the additives confirmed to reduce the loss of fluid into the formation, minimize pipe sticking, minimize losses in pressure, increase rate of penetration, reduce environmental impact and improve safety. Oil and gas drilling industry uses huge amounts of chemicals in drilling fluids as additives. Most of these chemicals are toxic and pose an excessive threat to mankind as well as the environment. On a global level, regulations to minimize utilization of toxic materials as drilling fluid components have been set to eliminating the environmental impact of expensive drilling fluid additives. The current work investigates the feasibility of using a bio-degradable waste (Barely grass) as green drilling fluid additive. The combined effect of barely grass concentration (0.29-1.7g) and bentonite (12.9-27.1g) is evaluated according to an adopted experimental design. The rheological and filtration properties were measured and compared to a reference fluid. The average range of apparent viscosity, plastic viscosity, yield point, and low-shear-rate yield point for the prepared drilling muds are 7.5-27 cP, 5-13 cP, 5-42 lb/100ft2, and 2-23 lb/100ft 2 respectively. The mathematical models and the variables significance are estimated from response surface analysis. The optimized drilling mud has competitive rheological and filtration characteristics compared to reference fluid. The additive seemed promising alternative to commercial polymer additives owing to its high fibers content mostly polysaccharides.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

More from this journal

The newest in Journal of Material Sciences & Engineering.

All its articles

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalJournal of Material Sciences & Engineering
  • SubjectEngineering
  • SubjectMaterials Science
  • BylineArticles whose byline prints “Ibtisam Kamal”
  • BylineArticles whose byline prints “Aryan Muzhafar”